You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
typesetting/quad/qtest/docs.rkt

2186 lines
90 KiB
Racket

6 years ago
#lang quadwriter/markdown
6 years ago
# Macros
A _macro_ is a syntactic form with an associated _transformer_ that
_expands_ the original form into existing forms. To put it another way,
a macro is an extension to the Racket compiler. Most of the syntactic
forms of `racket/base` and `racket` are actually macros that expand into
a small set of core constructs.
Like many languages, Racket provides pattern-based macros that make
simple transformations easy to implement and reliable to use. Racket
also supports arbitrary macro transformers that are implemented in
Racket—or in a macro-extended variant of Racket.
This chapter provides an introduction to Racket macros, but see [_Fear
of Macros_](http://www.greghendershott.com/fear-of-macros/) for an
introduction from a different perspective.
1 Pattern-Based Macros
1.1 `define-syntax-rule`
1.2 Lexical Scope
1.3 `define-syntax` and `syntax-rules`
1.4 Matching Sequences
1.5 Identifier Macros
1.6 `set!` Transformers
1.7 Macro-Generating Macros
1.8 Extended Example: Call-by-Reference Functions
2 General Macro Transformers
2.1 Syntax Objects
2.2 Macro Transformer Procedures
2.3 Mixing Patterns and Expressions: `syntax-case`
2.4 `with-syntax` and `generate-temporaries`
2.5 Compile and Run-Time Phases
2.6 General Phase Levels
2.6.1 Phases and Bindings
2.6.2 Phases and Modules
2.7 Syntax Taints
3 Module Instantiations and Visits
3.1 Declaration versus Instantiation
3.2 Compile-Time Instantiation
3.3 Visiting Modules
3.4 Lazy Visits via Available Modules
## 1. Pattern-Based Macros
A _pattern-based macro_ replaces any code that matches a pattern to an
expansion that uses parts of the original syntax that match parts of the
pattern.
### 1.1. `define-syntax-rule`
The simplest way to create a macro is to use `define-syntax-rule`:
```racket
(define-syntax-rule pattern template)
```
As a running example, consider the `swap` macro, which swaps the values
stored in two variables. It can be implemented using
`define-syntax-rule` as follows:
> The macro is “un-Rackety” in the sense that it involves side effects on
> variables—but the point of macros is to let you add syntactic forms that
> some other language designer might not approve.
```racket
(define-syntax-rule (swap x y)
(let ([tmp x])
(set! x y)
(set! y tmp)))
```
The `define-syntax-rule` form binds a macro that matches a single
pattern. The pattern must always start with an open parenthesis followed
by an identifier, which is `swap` in this case. After the initial
identifier, other identifiers are _macro pattern variables_ that can
match anything in a use of the macro. Thus, this macro matches the form
`(swap form1 form2)` for any `form1` and `form2`.
> Macro pattern variables are similar to pattern variables for `match`.
> See \[missing\].
After the pattern in `define-syntax-rule` is the _template_. The
template is used in place of a form that matches the pattern, except
that each instance of a pattern variable in the template is replaced
with the part of the macro use the pattern variable matched. For
example, in
`(swap` `first` `last)`
the pattern variable `x` matches `first` and `y` matches `last`, so that
the expansion is
```racket
(let ([tmp first])
(set! first last)
(set! last tmp))
```
### 1.2. Lexical Scope
Suppose that we use the `swap` macro to swap variables named `tmp` and
`other`:
```racket
(let ([tmp 5]
[other 6])
(swap tmp other)
(list tmp other))
```
The result of the above expression should be `(6 5)`. The naive
expansion of this use of `swap`, however, is
```racket
(let ([tmp 5]
[other 6])
(let ([tmp tmp])
(set! tmp other)
(set! other tmp))
(list tmp other))
```
whose result is `(5 6)`. The problem is that the naive expansion
confuses the `tmp` in the context where `swap` is used with the `tmp`
that is in the macro template.
Racket doesnt produce the naive expansion for the above use of `swap`.
Instead, it produces
```racket
(let ([tmp 5]
[other 6])
(let ([tmp_1 tmp])
(set! tmp other)
(set! other tmp_1))
(list tmp other))
```
with the correct result in `(6 5)`. Similarly, in the example
```racket
(let ([set! 5]
[other 6])
(swap set! other)
(list set! other))
```
the expansion is
```racket
(let ([set!_1 5]
[other 6])
(let ([tmp_1 set!_1])
(set! set!_1 other)
(set! other tmp_1))
(list set!_1 other))
```
so that the local `set!` binding doesnt interfere with the assignments
introduced by the macro template.
In other words, Rackets pattern-based macros automatically maintain
lexical scope, so macro implementors can reason about variable reference
in macros and macro uses in the same way as for functions and function
calls.
### 1.3. `define-syntax` and `syntax-rules`
The `define-syntax-rule` form binds a macro that matches a single
pattern, but Rackets macro system supports transformers that match
multiple patterns starting with the same identifier. To write such
macros, the programmer must use the more general `define-syntax` form
along with the `syntax-rules` transformer form:
```racket
(define-syntax id
(syntax-rules (literal-id ...)
[pattern template]
...))
```
> The `define-syntax-rule` form is itself a macro that expands into
> `define-syntax` with a `syntax-rules` form that contains only one
> pattern and template.
For example, suppose we would like a `rotate` macro that generalizes
`swap` to work on either two or three identifiers, so that
```racket
(let ([red 1] [green 2] [blue 3])
(rotate red green) ; swaps
(rotate red green blue) ; rotates left
(list red green blue))
```
produces `(1 3 2)`. We can implement `rotate` using `syntax-rules`:
```racket
(define-syntax rotate
(syntax-rules ()
[(rotate a b) (swap a b)]
[(rotate a b c) (begin
(swap a b)
(swap b c))]))
```
The expression `(rotate red green)` matches the first pattern in the
`syntax-rules` form, so it expands to `(swap red green)`. The expression
`(rotate red green blue)` matches the second pattern, so it expands to
`(begin (swap red green) (swap green blue))`.
### 1.4. Matching Sequences
A better `rotate` macro would allow any number of identifiers, instead
of just two or three. To match a use of `rotate` with any number of
identifiers, we need a pattern form that has something like a Kleene
star. In a Racket macro pattern, a star is written as `...`.
To implement `rotate` with `...`, we need a base case to handle a single
identifier, and an inductive case to handle more than one identifier:
```racket
(define-syntax rotate
(syntax-rules ()
[(rotate a) (void)]
[(rotate a b c ...) (begin
(swap a b)
(rotate b c ...))]))
```
When a pattern variable like `c` is followed by `...` in a pattern, then
it must be followed by `...` in a template, too. The pattern variable
effectively matches a sequence of zero or more forms, and it is replaced
in the template by the same sequence.
Both versions of `rotate` so far are a bit inefficient, since pairwise
swapping keeps moving the value from the first variable into every
variable in the sequence until it arrives at the last one. A more
efficient `rotate` would move the first value directly to the last
variable. We can use `...` patterns to implement the more efficient
variant using a helper macro:
```racket
(define-syntax rotate
(syntax-rules ()
[(rotate a c ...)
(shift-to (c ... a) (a c ...))]))
(define-syntax shift-to
(syntax-rules ()
[(shift-to (from0 from ...) (to0 to ...))
(let ([tmp from0])
(set! to from) ...
(set! to0 tmp))]))
```
In the `shift-to` macro, `...` in the template follows `(set! to from)`,
which causes the `(set! to from)` expression to be duplicated as many
times as necessary to use each identifier matched in the `to` and `from`
sequences. \(The number of `to` and `from` matches must be the same,
otherwise the macro expansion fails with an error.\)
### 1.5. Identifier Macros
Given our macro definitions, the `swap` or `rotate` identifiers must be
used after an open parenthesis, otherwise a syntax error is reported:
```racket
> (+ swap 3)
eval:2:0: swap: bad syntax
in: swap
```
An _identifier macro_ is a pattern-matching macro that works when used
by itself without parentheses. For example, we can define `val` as an
identifier macro that expands to `(get-val)`, so `(+ val 3)` would
expand to `(+ (get-val) 3)`.
```racket
> (define-syntax val
(lambda (stx)
(syntax-case stx ()
[val (identifier? (syntax val)) (syntax (get-val))])))
> (define-values (get-val put-val!)
(let ([private-val 0])
(values (lambda () private-val)
(lambda (v) (set! private-val v)))))
> val
0
> (+ val 3)
3
```
The `val` macro uses `syntax-case`, which enables defining more powerful
macros and will be explained in the Mixing Patterns and Expressions:
`syntax-case` section. For now it is sufficient to know that to define a
macro, `syntax-case` is used in a `lambda`, and its templates must be
wrapped with an explicit `syntax` constructor. Finally, `syntax-case`
clauses may specify additional guard conditions after the pattern.
Our `val` macro uses an `identifier?` condition to ensure that `val`
_must not_ be used with parentheses. Instead, the macro raises a syntax
error:
```racket
> (val)
eval:8:0: val: bad syntax
in: (val)
```
### 1.6. `set!` Transformers
With the above `val` macro, we still must call `put-val!` to change the
stored value. It would be more convenient, however, to use `set!`
directly on `val`. To invoke the macro when `val` is used with `set!`,
we create an assignment transformer with `make-set!-transformer`. We
must also declare `set!` as a literal in the `syntax-case` literal list.
```racket
> (define-syntax val2
(make-set!-transformer
(lambda (stx)
(syntax-case stx (set!)
[val2 (identifier? (syntax val2)) (syntax (get-val))]
[(set! val2 e) (syntax (put-val! e))]))))
> val2
0
> (+ val2 3)
3
> (set! val2 10)
> val2
10
```
### 1.7. Macro-Generating Macros
Suppose that we have many identifiers like `val` and `val2` that wed
like to redirect to accessor and mutator functions like `get-val` and
`put-val!`. Wed like to be able to just write:
`(define-get/put-id` `val` `get-val` `put-val!)`
Naturally, we can implement `define-get/put-id` as a macro:
```racket
> (define-syntax-rule (define-get/put-id id get put!)
(define-syntax id
(make-set!-transformer
(lambda (stx)
(syntax-case stx (set!)
[id (identifier? (syntax id)) (syntax (get))]
[(set! id e) (syntax (put! e))])))))
> (define-get/put-id val3 get-val put-val!)
> (set! val3 11)
> val3
11
```
The `define-get/put-id` macro is a _macro-generating macro_.
### 1.8. Extended Example: Call-by-Reference Functions
We can use pattern-matching macros to add a form to Racket for defining
first-order _call-by-reference_ functions. When a call-by-reference
function body mutates its formal argument, the mutation applies to
variables that are supplied as actual arguments in a call to the
function.
For example, if `define-cbr` is like `define` except that it defines a
call-by-reference function, then
```racket
(define-cbr (f a b)
(swap a b))
(let ([x 1] [y 2])
(f x y)
(list x y))
```
produces `(2 1)`.
We will implement call-by-reference functions by having function calls
supply accessor and mutators for the arguments, instead of supplying
argument values directly. In particular, for the function `f` above,
well generate
```racket
(define (do-f get-a get-b put-a! put-b!)
(define-get/put-id a get-a put-a!)
(define-get/put-id b get-b put-b!)
(swap a b))
```
and redirect a function call `(f x y)` to
```racket
(do-f (lambda () x)
(lambda () y)
(lambda (v) (set! x v))
(lambda (v) (set! y v)))
```
Clearly, then `define-cbr` is a macro-generating macro, which binds `f`
to a macro that expands to a call of `do-f`. That is, `(define-cbr (f a
b) (swap a b))` needs to generate the definition
```racket
(define-syntax f
(syntax-rules ()
[(id actual ...)
(do-f (lambda () actual)
...
(lambda (v)
(set! actual v))
...)]))
```
At the same time, `define-cbr` needs to define `do-f` using the body of
`f`, this second part is slightly more complex, so we defer most of it
to a `define-for-cbr` helper module, which lets us write `define-cbr`
easily enough:
```racket
(define-syntax-rule (define-cbr (id arg ...) body)
(begin
(define-syntax id
(syntax-rules ()
[(id actual (... ...))
(do-f (lambda () actual)
(... ...)
(lambda (v)
(set! actual v))
(... ...))]))
(define-for-cbr do-f (arg ...)
() ; explained below...
body)))
```
Our remaining task is to define `define-for-cbr` so that it converts
`(define-for-cbr` `do-f` `(a` `b)` `()` `(swap` `a` `b))`
to the function definition `do-f` above. Most of the work is generating
a `define-get/put-id` declaration for each argument, `a` and `b`, and
putting them before the body. Normally, thats an easy task for `...` in
a pattern and template, but this time theres a catch: we need to
generate the names `get-a` and `put-a!` as well as `get-b` and `put-b!`,
and the pattern language provides no way to synthesize identifiers based
on existing identifiers.
As it turns out, lexical scope gives us a way around this problem. The
trick is to iterate expansions of `define-for-cbr` once for each
argument in the function, and thats why `define-for-cbr` starts with an
apparently useless `()` after the argument list. We need to keep track
of all the arguments seen so far and the `get` and `put` names generated
for each, in addition to the arguments left to process. After weve
processed all the identifiers, then we have all the names we need.
Here is the definition of `define-for-cbr`:
```racket
(define-syntax define-for-cbr
(syntax-rules ()
[(define-for-cbr do-f (id0 id ...)
(gens ...) body)
(define-for-cbr do-f (id ...)
(gens ... (id0 get put)) body)]
[(define-for-cbr do-f ()
((id get put) ...) body)
(define (do-f get ... put ...)
(define-get/put-id id get put) ...
body)]))
```
Step-by-step, expansion proceeds as follows:
```racket
(define-for-cbr do-f (a b)
() (swap a b))
=> (define-for-cbr do-f (b)
([a get_1 put_1]) (swap a b))
=> (define-for-cbr do-f ()
([a get_1 put_1] [b get_2 put_2]) (swap a b))
=> (define (do-f get_1 get_2 put_1 put_2)
(define-get/put-id a get_1 put_1)
(define-get/put-id b get_2 put_2)
(swap a b))
```
The “subscripts” on `get_1`, `get_2`, `put_1`, and `put_2` are inserted
by the macro expander to preserve lexical scope, since the `get`
generated by each iteration of `define-for-cbr` should not bind the
`get` generated by a different iteration. In other words, we are
essentially tricking the macro expander into generating fresh names for
us, but the technique illustrates some of the surprising power of
pattern-based macros with automatic lexical scope.
The last expression eventually expands to just
```racket
(define (do-f get_1 get_2 put_1 put_2)
(let ([tmp (get_1)])
(put_1 (get_2))
(put_2 tmp)))
```
which implements the call-by-name function `f`.
To summarize, then, we can add call-by-reference functions to Racket
with just three small pattern-based macros: `define-cbr`,
`define-for-cbr`, and `define-get/put-id`.
## 2. General Macro Transformers
The `define-syntax` form creates a _transformer binding_ for an
identifier, which is a binding that can be used at compile time while
expanding expressions to be evaluated at run time. The compile-time
value associated with a transformer binding can be anything; if it is a
procedure of one argument, then the binding is used as a macro, and the
procedure is the _macro transformer_.
2.1 Syntax Objects
2.2 Macro Transformer Procedures
2.3 Mixing Patterns and Expressions: `syntax-case`
2.4 `with-syntax` and `generate-temporaries`
2.5 Compile and Run-Time Phases
2.6 General Phase Levels
2.6.1 Phases and Bindings
2.6.2 Phases and Modules
2.7 Syntax Taints
### 2.1. Syntax Objects
The input and output of a macro transformer \(i.e., source and
replacement forms\) are represented as _syntax objects_. A syntax object
contains symbols, lists, and constant values \(such as numbers\) that
essentially correspond to the `quote`d form of the expression. For
example, a representation of the expression `(+ 1 2)` contains the
symbol `'+` and the numbers `1` and `2`, all in a list. In addition to
this quoted content, a syntax object associates source-location and
lexical-binding information with each part of the form. The
source-location information is used when reporting syntax errors \(for
example\), and the lexical-binding information allows the macro system
to maintain lexical scope. To accommodate this extra information, the
represention of the expression `(+ 1 2)` is not merely `'(+ 1 2)`, but a
packaging of `'(+ 1 2)` into a syntax object.
To create a literal syntax object, use the `syntax` form:
```racket
> (syntax (+ 1 2))
#<syntax:eval:1:0 (+ 1 2)>
```
In the same way that `'` abbreviates `quote`, `#'` abbreviates `syntax`:
```racket
> #'(+ 1 2)
#<syntax:eval:1:0 (+ 1 2)>
```
A syntax object that contains just a symbol is an _identifier syntax
object_. Racket provides some additional operations specific to
identifier syntax objects, including the `identifier?` operation to
detect identifiers. Most notably, `free-identifier=?` determines
whether two identifiers refer to the same binding:
```racket
> (identifier? #'car)
#t
> (identifier? #'(+ 1 2))
#f
> (free-identifier=? #'car #'cdr)
#f
> (free-identifier=? #'car #'car)
#t
> (require (only-in racket/base [car also-car]))
> (free-identifier=? #'car #'also-car)
#t
```
To see the lists, symbols, numbers, etc. within a syntax object, use
`syntax->datum`:
```racket
> (syntax->datum #'(+ 1 2))
'(+ 1 2)
```
The `syntax-e` function is similar to `syntax->datum`, but it unwraps a
single layer of source-location and lexical-context information, leaving
sub-forms that have their own information wrapped as syntax objects:
```racket
> (syntax-e #'(+ 1 2))
'(#<syntax:eval:1:0 +> #<syntax:eval:1:0 1> #<syntax:eval:1:0 2>)
```
The `syntax-e` function always leaves syntax-object wrappers around
sub-forms that are represented via symbols, numbers, and other literal
values. The only time it unwraps extra sub-forms is when unwrapping a
pair, in which case the `cdr` of the pair may be recursively unwrapped,
depending on how the syntax object was constructed.
The opposite of `syntax->datum` is, of course, `datum->syntax`. In
addition to a datum like `'(+ 1 2)`, `datum->syntax` needs an existing
syntax object to donate its lexical context, and optionally another
syntax object to donate its source location:
```racket
> (datum->syntax #'lex
'(+ 1 2)
#'srcloc)
#<syntax:eval:1:0 (+ 1 2)>
```
In the above example, the lexical context of `#'lex` is used for the new
syntax object, while the source location of `#'srcloc` is used.
When the second \(i.e., the “datum”\) argument to `datum->syntax`
includes syntax objects, those syntax objects are preserved intact in
the result. That is, deconstructing the result with `syntax-e`
eventually produces the syntax objects that were given to
`datum->syntax`.
### 2.2. Macro Transformer Procedures
Any procedure of one argument can be a macro transformer. As it turns
out, the `syntax-rules` form is a macro that expands to a procedure
form. For example, if you evaluate a `syntax-rules` form directly
\(instead of placing on the right-hand of a `define-syntax` form\), the
result is a procedure:
```racket
> (syntax-rules () [(nothing) something])
#<procedure>
```
Instead of using `syntax-rules`, you can write your own macro
transformer procedure directly using `lambda`. The argument to the
procedure is a syntax object that represents the source form, and the
result of the procedure must be a syntax object that represents the
replacement form:
```racket
> (define-syntax self-as-string
(lambda (stx)
(datum->syntax stx
(format "~s" (syntax->datum stx)))))
> (self-as-string (+ 1 2))
"(self-as-string (+ 1 2))"
```
The source form passed to a macro transformer represents an expression
in which its identifier is used in an application position \(i.e., after
a parenthesis that starts an expression\), or it represents the
identifier by itself if it is used as an expression position and not in
an application position.The procedure produced by `syntax-rules` raises
a syntax error if its argument corresponds to a use of the identifier by
itself, which is why `syntax-rules` does not implement an identifier
macro.
```racket
> (self-as-string (+ 1 2))
"(self-as-string (+ 1 2))"
> self-as-string
"self-as-string"
```
The `define-syntax` form supports the same shortcut syntax for functions
as `define`, so that the following `self-as-string` definition is
equivalent to the one that uses `lambda` explicitly:
```racket
> (define-syntax (self-as-string stx)
(datum->syntax stx
(format "~s" (syntax->datum stx))))
> (self-as-string (+ 1 2))
"(self-as-string (+ 1 2))"
```
### 2.3. Mixing Patterns and Expressions: `syntax-case`
The procedure generated by `syntax-rules` internally uses `syntax-e` to
deconstruct the given syntax object, and it uses `datum->syntax` to
construct the result. The `syntax-rules` form doesnt provide a way to
escape from pattern-matching and template-construction mode into an
arbitrary Racket expression.
The `syntax-case` form lets you mix pattern matching, template
construction, and arbitrary expressions:
```racket
(syntax-case stx-expr (literal-id ...)
[pattern expr]
...)
```
Unlike `syntax-rules`, the `syntax-case` form does not produce a
procedure. Instead, it starts with a `stx-expr` expression that
determines the syntax object to match against the `pattern`s. Also, each
`syntax-case` clause has a `pattern` and `expr`, instead of a `pattern`
and `template`. Within an `expr`, the `syntax` form—usually abbreviated
with `#'`—shifts into template-construction mode; if the `expr` of a
clause starts with `#'`, then we have something like a `syntax-rules`
form:
```racket
> (syntax->datum
(syntax-case #'(+ 1 2) ()
[(op n1 n2) #'(- n1 n2)]))
'(- 1 2)
```
We could write the `swap` macro using `syntax-case` instead of
`define-syntax-rule` or `syntax-rules`:
```racket
(define-syntax (swap stx)
(syntax-case stx ()
[(swap x y) #'(let ([tmp x])
(set! x y)
(set! y tmp))]))
```
One advantage of using `syntax-case` is that we can provide better error
reporting for `swap`. For example, with the `define-syntax-rule`
definition of `swap`, then `(swap x 2)` produces a syntax error in terms
of `set!`, because `2` is not an identifier. We can refine our
`syntax-case` implementation of `swap` to explicitly check the
sub-forms:
```racket
(define-syntax (swap stx)
(syntax-case stx ()
[(swap x y)
(if (and (identifier? #'x)
(identifier? #'y))
#'(let ([tmp x])
(set! x y)
(set! y tmp))
(raise-syntax-error #f
"not an identifier"
stx
(if (identifier? #'x)
#'y
#'x)))]))
```
With this definition, `(swap x 2)` provides a syntax error originating
from `swap` instead of `set!`.
In the above definition of `swap`, `#'x` and `#'y` are templates, even
though they are not used as the result of the macro transformer. This
example illustrates how templates can be used to access pieces of the
input syntax, in this case for checking the form of the pieces. Also,
the match for `#'x` or `#'y` is used in the call to
`raise-syntax-error`, so that the syntax-error message can point
directly to the source location of the non-identifier.
### 2.4. `with-syntax` and `generate-temporaries`
Since `syntax-case` lets us compute with arbitrary Racket expressions,
we can more simply solve a problem that we had in writing
`define-for-cbr` \(see Extended Example: Call-by-Reference Functions\),
where we needed to generate a set of names based on a sequence `id ...`:
```racket
(define-syntax (define-for-cbr stx)
(syntax-case stx ()
[(_ do-f (id ...) body)
....
#'(define (do-f get ... put ...)
(define-get/put-id id get put) ...
body) ....]))
```
In place of the `....`s above, we need to bind `get ...` and `put ...`
to lists of generated identifiers. We cannot use `let` to bind `get` and
`put`, because we need bindings that count as pattern variables, instead
of normal local variables. The `with-syntax` form lets us bind pattern
variables:
```racket
(define-syntax (define-for-cbr stx)
(syntax-case stx ()
[(_ do-f (id ...) body)
(with-syntax ([(get ...) ....]
[(put ...) ....])
#'(define (do-f get ... put ...)
(define-get/put-id id get put) ...
body))]))
```
Now we need an expression in place of `....` that generates as many
identifiers as there are `id` matches in the original pattern. Since
this is a common task, Racket provides a helper function,
`generate-temporaries`, that takes a sequence of identifiers and returns
a sequence of generated identifiers:
```racket
(define-syntax (define-for-cbr stx)
(syntax-case stx ()
[(_ do-f (id ...) body)
(with-syntax ([(get ...) (generate-temporaries #'(id ...))]
[(put ...) (generate-temporaries #'(id ...))])
#'(define (do-f get ... put ...)
(define-get/put-id id get put) ...
body))]))
```
This way of generating identifiers is normally easier to think about
than tricking the macro expander into generating names with purely
pattern-based macros.
In general, the left-hand side of a `with-syntax` binding is a pattern,
just like in `syntax-case`. In fact, a `with-syntax` form is just a
`syntax-case` form turned partially inside-out.
### 2.5. Compile and Run-Time Phases
As sets of macros get more complicated, you might want to write your own
helper functions, like `generate-temporaries`. For example, to provide
good syntax error messsages, `swap`, `rotate`, and `define-cbr` all
should check that certain sub-forms in the source form are identifiers.
We could use a `check-ids` function to perform this checking everywhere:
```racket
(define-syntax (swap stx)
(syntax-case stx ()
[(swap x y) (begin
(check-ids stx #'(x y))
#'(let ([tmp x])
(set! x y)
(set! y tmp)))]))
(define-syntax (rotate stx)
(syntax-case stx ()
[(rotate a c ...)
(begin
(check-ids stx #'(a c ...))
#'(shift-to (c ... a) (a c ...)))]))
```
The `check-ids` function can use the `syntax->list` function to convert
a syntax-object wrapping a list into a list of syntax objects:
```racket
(define (check-ids stx forms)
(for-each
(lambda (form)
(unless (identifier? form)
(raise-syntax-error #f
"not an identifier"
stx
form)))
(syntax->list forms)))
```
If you define `swap` and `check-ids` in this way, however, it doesnt
work:
```racket
> (let ([a 1] [b 2]) (swap a b))
check-ids: undefined;
cannot reference an identifier before its definition
in module: top-level
```
The problem is that `check-ids` is defined as a run-time expression, but
`swap` is trying to use it at compile time. In interactive mode, compile
time and run time are interleaved, but they are not interleaved within
the body of a module, and they are not interleaved across modules that
are compiled ahead-of-time. To help make all of these modes treat code
consistently, Racket separates the binding spaces for different phases.
To define a `check-ids` function that can be referenced at compile time,
use `begin-for-syntax`:
```racket
(begin-for-syntax
(define (check-ids stx forms)
(for-each
(lambda (form)
(unless (identifier? form)
(raise-syntax-error #f
"not an identifier"
stx
form)))
(syntax->list forms))))
```
With this for-syntax definition, then `swap` works:
```racket
> (let ([a 1] [b 2]) (swap a b) (list a b))
'(2 1)
> (swap a 1)
eval:13:0: swap: not an identifier
at: 1
in: (swap a 1)
```
When organizing a program into modules, you may want to put helper
functions in one module to be used by macros that reside on other
modules. In that case, you can write the helper function using `define`:
`"utils.rkt"`
```racket
#lang racket
(provide check-ids)
(define (check-ids stx forms)
(for-each
(lambda (form)
(unless (identifier? form)
(raise-syntax-error #f
"not an identifier"
stx
form)))
(syntax->list forms)))
```
Then, in the module that implements macros, import the helper function
using `(require (for-syntax "utils.rkt"))` instead of `(require
"utils.rkt")`:
```racket
#lang racket
(require (for-syntax "utils.rkt"))
(define-syntax (swap stx)
(syntax-case stx ()
[(swap x y) (begin
(check-ids stx #'(x y))
#'(let ([tmp x])
(set! x y)
(set! y tmp)))]))
```
Since modules are separately compiled and cannot have circular
dependencies, the `"utils.rkt"` modules run-time body can be compiled
before the compiling the module that implements `swap`. Thus, the
run-time definitions in `"utils.rkt"` can be used to implement `swap`,
as long as they are explicitly shifted into compile time by `(require
(for-syntax ....))`.
The `racket` module provides `syntax-case`, `generate-temporaries`,
`lambda`, `if`, and more for use in both the run-time and compile-time
phases. That is why we can use `syntax-case` in the `racket` REPL both
directly and in the right-hand side of a `define-syntax` form.
The `racket/base` module, in contrast, exports those bindings only in
the run-time phase. If you change the module above that defines `swap`
so that it uses the `racket/base` language instead of `racket`, then it
no longer works. Adding `(require (for-syntax racket/base))` imports
`syntax-case` and more into the compile-time phase, so that the module
works again.
Suppose that `define-syntax` is used to define a local macro in the
right-hand side of a `define-syntax` form. In that case, the right-hand
side of the inner `define-syntax` is in the _meta-compile phase level_,
also known as _phase level 2_. To import `syntax-case` into that phase
level, you would have to use `(require (for-syntax (for-syntax
racket/base)))` or, equivalently, `(require (for-meta 2 racket/base))`.
For example,
```racket
#lang racket/base
(require ;; This provides the bindings for the definition
;; of shell-game.
(for-syntax racket/base)
;; And this for the definition of
;; swap.
(for-syntax (for-syntax racket/base)))
(define-syntax (shell-game stx)
(define-syntax (swap stx)
(syntax-case stx ()
[(_ a b)
#'(let ([tmp a])
(set! a b)
(set! b tmp))]))
(syntax-case stx ()
[(_ a b c)
(let ([a #'a] [b #'b] [c #'c])
(when (= 0 (random 2)) (swap a b))
(when (= 0 (random 2)) (swap b c))
(when (= 0 (random 2)) (swap a c))
#`(list #,a #,b #,c))]))
(shell-game 3 4 5)
(shell-game 3 4 5)
(shell-game 3 4 5)
```
Negative phase levels also exist. If a macro uses a helper function that
is imported `for-syntax`, and if the helper function returns
syntax-object constants generated by `syntax`, then identifiers in the
syntax will need bindings at _phase level -1_, also known as the
_template phase level_, to have any binding at the run-time phase level
relative to the module that defines the macro.
For instance, the `swap-stx` helper function in the example below is not
a syntax transformer—its just an ordinary function—but it produces
syntax objects that get spliced into the result of `shell-game`.
Therefore, its containing `helper` submodule needs to be imported at
`shell-game`s phase 1 with `(require (for-syntax 'helper))`.
But from the perspective of `swap-stx`, its results will ultimately be
evaluated at phase level -1, when the syntax returned by `shell-game` is
evaluated. In other words, a negative phase level is a positive phase
level from the opposite direction: `shell-game`s phase 1 is
`swap-stx`s phase 0, so `shell-game`s phase 0 is `swap-stx`s phase
-1. And thats why this example wont work—the `'helper` submodule has
no bindings at phase -1.
```racket
#lang racket/base
(require (for-syntax racket/base))
(module helper racket/base
(provide swap-stx)
(define (swap-stx a-stx b-stx)
#`(let ([tmp #,a-stx])
(set! #,a-stx #,b-stx)
(set! #,b-stx tmp))))
(require (for-syntax 'helper))
(define-syntax (shell-game stx)
(syntax-case stx ()
[(_ a b c)
#`(begin
#,(swap-stx #'a #'b)
#,(swap-stx #'b #'c)
#,(swap-stx #'a #'c)
(list a b c))]))
(define x 3)
(define y 4)
(define z 5)
(shell-game x y z)
```
To repair this example, we add `(require (for-template racket/base))` to
the `'helper` submodule.
```racket
#lang racket/base
(require (for-syntax racket/base))
(module helper racket/base
(require (for-template racket/base)) ; binds `let` and `set!` at phase -1
(provide swap-stx)
(define (swap-stx a-stx b-stx)
#`(let ([tmp #,a-stx])
(set! #,a-stx #,b-stx)
(set! #,b-stx tmp))))
(require (for-syntax 'helper))
(define-syntax (shell-game stx)
(syntax-case stx ()
[(_ a b c)
#`(begin
#,(swap-stx #'a #'b)
#,(swap-stx #'b #'c)
#,(swap-stx #'a #'c)
(list a b c))]))
(define x 3)
(define y 4)
(define z 5)
(shell-game x y z)
(shell-game x y z)
(shell-game x y z)
```
### 2.6. General Phase Levels
A _phase_ can be thought of as a way to separate computations in a
pipeline of processes where one produces code that is used by the next.
\(E.g., a pipeline that consists of a preprocessor process, a compiler,
and an assembler.\)
Imagine starting two Racket processes for this purpose. If you ignore
inter-process communication channels like sockets and files, the
processes will have no way to share anything other than the text that is
piped from the standard output of one process into the standard input of
the other. Similarly, Racket effectively allows multiple invocations of
a module to exist in the same process but separated by phase. Racket
enforces _separation_ of such phases, where different phases cannot
communicate in any way other than via the protocol of macro expansion,
where the output of one phases is the code used in the next.
#### 2.6.1. Phases and Bindings
Every binding of an identifier exists in a particular phase. The link
between a binding and its phase is represented by an integer _phase
level_. Phase level 0 is the phase used for “plain” \(or “runtime”\)
definitions, so
`(define` `age` `5)`
adds a binding for `age` into phase level 0. The identifier `age` can
be defined at a higher phase level using `begin-for-syntax`:
```racket
(begin-for-syntax
(define age 5))
```
With a single `begin-for-syntax` wrapper, `age` is defined at phase
level 1. We can easily mix these two definitions in the same module or
in a top-level namespace, and there is no clash between the two `age`s
that are defined at different phase levels:
```racket
> (define age 3)
> (begin-for-syntax
(define age 9))
```
The `age` binding at phase level 0 has a value of 3, and the `age`
binding at phase level 1 has a value of 9.
Syntax objects capture binding information as a first-class value. Thus,
`#'age`
is a syntax object that represents the `age` binding—but since there are
two `age`s \(one at phase level 0 and one at phase level 1\), which one
does it capture? In fact, Racket imbues `#'age` with lexical
information for all phase levels, so the answer is that `#'age` captures
both.
The relevant binding of `age` captured by `#'age` is determined when
`#'age` is eventually used. As an example, we bind `#'age` to a pattern
variable so we can use it in a template, and then we `eval`uate the
template: We use `eval` here to demonstrate phases, but see \[missing\]
for caveats about `eval`.
```racket
> (eval (with-syntax ([age #'age])
#'(displayln age)))
3
```
The result is `3` because `age` is used at phase 0 level. We can try
again with the use of `age` inside `begin-for-syntax`:
```racket
> (eval (with-syntax ([age #'age])
#'(begin-for-syntax
(displayln age))))
9
```
In this case, the answer is `9`, because we are using `age` at phase
level 1 instead of 0 \(i.e., `begin-for-syntax` evaluates its
expressions at phase level 1\). So, you can see that we started with the
same syntax object, `#'age`, and we were able to use it in two different
ways: at phase level 0 and at phase level 1.
A syntax object has a lexical context from the moment it first exists. A
syntax object that is provided from a module retains its lexical
context, and so it references bindings in the context of its source
module, not the context of its use. The following example defines
`button` at phase level 0 and binds it to `0`, while `see-button` binds
the syntax object for `button` in module `a`:
```racket
> (module a racket
(define button 0)
(provide (for-syntax see-button))
; Why not (define see-button #'button)? We explain later.
(define-for-syntax see-button #'button))
> (module b racket
(require 'a)
(define button 8)
(define-syntax (m stx)
see-button)
(m))
> (require 'b)
0
```
The result of the `m` macro is the value of `see-button`, which is
`#'button` with the lexical context of the `a` module. Even though
there is another `button` in `b`, the second `button` will not confuse
Racket, because the lexical context of `#'button` \(the value bound to
`see-button`\) is `a`.
Note that `see-button` is bound at phase level 1 by virtue of defining
it with `define-for-syntax`. Phase level 1 is needed because `m` is a
macro, so its body executes at one phase higher than the context of its
definition. Since `m` is defined at phase level 0, its body is at phase
level 1, so any bindings referenced by the body must be at phase level
1.
#### 2.6.2. Phases and Modules
A phase level is a module-relative concept. When importing from another
module via `require`, Racket lets us shift imported bindings to a phase
level that is different from the original one:
```racket
(require "a.rkt") ; import with no phase shift
(require (for-syntax "a.rkt")) ; shift phase by +1
(require (for-template "a.rkt")) ; shift phase by -1
(require (for-meta 5 "a.rkt")) ; shift phase by +5
```
That is, using `for-syntax` in `require` means that all of the bindings
from that module will have their phase levels increased by one. A
binding that is `define`d at phase level 0 and imported with
`for-syntax` becomes a phase-level 1 binding:
```racket
> (module c racket
(define x 0) ; defined at phase level 0
(provide x))
> (module d racket
(require (for-syntax 'c))
; has a binding at phase level 1, not 0:
#'x)
```
Lets see what happens if we try to create a binding for the `#'button`
syntax object at phase level 0:
```racket
> (define button 0)
> (define see-button #'button)
```
Now both `button` and `see-button` are defined at phase 0. The lexical
context of `#'button` will know that there is a binding for `button` at
phase 0. In fact, it seems like things are working just fine if we try
to `eval` `see-button`:
```racket
> (eval see-button)
0
```
Now, lets use `see-button` in a macro:
```racket
> (define-syntax (m stx)
see-button)
> (m)
see-button: undefined;
cannot reference an identifier before its definition
in module: top-level
```
Clearly, `see-button` is not defined at phase level 1, so we cannot
refer to it inside the macro body. Lets try to use `see-button` in
another module by putting the button definitions in a module and
importing it at phase level 1. Then, we will get `see-button` at phase
level 1:
```racket
> (module a racket
(define button 0)
(define see-button #'button)
(provide see-button))
> (module b racket
(require (for-syntax 'a)) ; gets see-button at phase level 1
(define-syntax (m stx)
see-button)
(m))
eval:1:0: button: unbound identifier;
also, no #%top syntax transformer is bound
in: button
```
Racket says that `button` is unbound now! When `a` is imported at phase
level 1, we have the following bindings:
```racket
button at phase level 1
see-button at phase level 1
```
So the macro `m` can see a binding for `see-button` at phase level 1 and
will return the `#'button` syntax object, which refers to `button`
binding at phase level 1. But the use of `m` is at phase level 0, and
there is no `button` at phase level 0 in `b`. That is why `see-button`
needs to be bound at phase level 1, as in the original `a`. In the
original `b`, then, we have the following bindings:
```racket
button at phase level 0
see-button at phase level 1
```
In this scenario, we can use `see-button` in the macro, since
`see-button` is bound at phase level 1. When the macro expands, it will
refer to a `button` binding at phase level 0.
Defining `see-button` with `(define see-button #'button)` isnt
inherently wrong; it depends on how we intend to use `see-button`. For
example, we can arrange for `m` to sensibly use `see-button` because it
puts it in a phase level 1 context using `begin-for-syntax`:
```racket
> (module a racket
(define button 0)
(define see-button #'button)
(provide see-button))
> (module b racket
(require (for-syntax 'a))
(define-syntax (m stx)
(with-syntax ([x see-button])
#'(begin-for-syntax
(displayln x))))
(m))
0
```
In this case, module `b` has both `button` and `see-button` bound at
phase level 1. The expansion of the macro is
```racket
(begin-for-syntax
(displayln button))
```
which works, because `button` is bound at phase level 1.
Now, you might try to cheat the phase system by importing `a` at both
phase level 0 and phase level 1. Then you would have the following
bindings
```racket
button at phase level 0
see-button at phase level 0
button at phase level 1
see-button at phase level 1
```
You might expect now that `see-button` in a macro would work, but it
doesnt:
```racket
> (module a racket
(define button 0)
(define see-button #'button)
(provide see-button))
> (module b racket
(require 'a
(for-syntax 'a))
(define-syntax (m stx)
see-button)
(m))
eval:1:0: button: unbound identifier;
also, no #%top syntax transformer is bound
in: button
```
The `see-button` inside macro `m` comes from the `(for-syntax 'a)`
import. For macro `m` to work, it needs to have `button` bound at phase
0. That binding exists—its implied by `(require 'a)`. However,
`(require 'a)` and `(require (for-syntax 'a))` are _different
instantiations_ of the same module. The `see-button` at phase 1 only
refers to the `button` at phase 1, not the `button` bound at phase 0
from a different instantiation—even from the same source module.
This kind of phase-level mismatch between instantiations can be repaired
with `syntax-shift-phase-level`. Recall that a syntax object like
`#'button` captures lexical information at _all_ phase levels. The
problem here is that `see-button` is invoked at phase 1, but needs to
return a syntax object that can be evaluated at phase 0. By default,
`see-button` is bound to `#'button` at the same phase level. But with
`syntax-shift-phase-level`, we can make `see-button` refer to `#'button`
at a different relative phase level. In this case, we use a phase shift
of `-1` to make `see-button` at phase 1 refer to `#'button` at phase 0.
\(Because the phase shift happens at every level, it will also make
`see-button` at phase 0 refer to `#'button` at phase -1.\)
Note that `syntax-shift-phase-level` merely creates a reference across
phases. To make that reference work, we still need to instantiate our
module at both phases so the reference and its target have their
bindings available. Thus, in module `'b`, we still import module `'a` at
both phase 0 and phase 1—using `(require 'a (for-syntax 'a))`—so we have
a phase-1 binding for `see-button` and a phase-0 binding for `button`.
Now macro `m` will work.
```racket
> (module a racket
(define button 0)
(define see-button (syntax-shift-phase-level #'button -1))
(provide see-button))
> (module b racket
(require 'a (for-syntax 'a))
(define-syntax (m stx)
see-button)
(m))
> (require 'b)
0
```
By the way, what happens to the `see-button` thats bound at phase 0?
Its `#'button` binding has likewise been shifted, but to phase -1. Since
`button` itself isnt bound at phase -1, if we try to evaluate
`see-button` at phase 0, we get an error. In other words, we havent
permanently cured our mismatch problem—weve just shifted it to a less
bothersome location.
```racket
> (module a racket
(define button 0)
(define see-button (syntax-shift-phase-level #'button -1))
(provide see-button))
> (module b racket
(require 'a (for-syntax 'a))
(define-syntax (m stx)
see-button)
(m))
> (module b2 racket
(require 'a)
(eval see-button))
> (require 'b2)
button: undefined;
cannot reference an identifier before its definition
in module: top-level
```
Mismatches like the one above can also arise when a macro tries to match
literal bindings—using `syntax-case` or `syntax-parse`.
```racket
> (module x racket
(require (for-syntax syntax/parse)
(for-template racket/base))
(provide (all-defined-out))
(define button 0)
(define (make) #'button)
(define-syntax (process stx)
(define-literal-set locals (button))
(syntax-parse stx
[(_ (n (~literal button))) #'#''ok])))
> (module y racket
(require (for-meta 1 'x)
(for-meta 2 'x racket/base))
(begin-for-syntax
(define-syntax (m stx)
(with-syntax ([out (make)])
#'(process (0 out)))))
(define-syntax (p stx)
(m))
(p))
eval:2.0: process: expected the identifier `button'
at: button
in: (process (0 button))
```
In this example, `make` is being used in `y` at phase level 2, and it
returns the `#'button` syntax object—which refers to `button` bound at
phase level 0 inside `x` and at phase level 2 in `y` from `(for-meta 2
'x)`. The `process` macro is imported at phase level 1 from `(for-meta
1 'x)`, and it knows that `button` should be bound at phase level 1.
When the `syntax-parse` is executed inside `process`, it is looking for
`button` bound at phase level 1 but it sees only a phase level 2 binding
and doesnt match.
To fix the example, we can provide `make` at phase level 1 relative to
`x`, and then we import it at phase level 1 in `y`:
```racket
> (module x racket
(require (for-syntax syntax/parse)
(for-template racket/base))
(provide (all-defined-out))
(define button 0)
(provide (for-syntax make))
(define-for-syntax (make) #'button)
(define-syntax (process stx)
(define-literal-set locals (button))
(syntax-parse stx
[(_ (n (~literal button))) #'#''ok])))
> (module y racket
(require (for-meta 1 'x)
(for-meta 2 racket/base))
(begin-for-syntax
(define-syntax (m stx)
(with-syntax ([out (make)])
#'(process (0 out)))))
(define-syntax (p stx)
(m))
(p))
> (require 'y)
'ok
```
### 2.7. Syntax Taints
A use of a macro can expand into a use of an identifier that is not
exported from the module that binds the macro. In general, such an
identifier must not be extracted from the expanded expression and used
in a different context, because using the identifier in a different
context may break invariants of the macros module.
For example, the following module exports a macro `go` that expands to a
use of `unchecked-go`:
`"m.rkt"`
```racket
#lang racket
(provide go)
(define (unchecked-go n x)
; to avoid disaster, n must be a number
(+ n 17))
(define-syntax (go stx)
(syntax-case stx ()
[(_ x)
#'(unchecked-go 8 x)]))
```
If the reference to `unchecked-go` is extracted from the expansion of
`(go 'a)`, then it might be inserted into a new expression,
`(unchecked-go #f 'a)`, leading to disaster. The `datum->syntax`
procedure can be used similarly to construct references to an unexported
identifier, even when no macro expansion includes a reference to the
identifier.
To prevent such abuses of unexported identifiers, the `go` macro must
explicitly protect its expansion by using `syntax-protect`:
```racket
(define-syntax (go stx)
(syntax-case stx ()
[(_ x)
(syntax-protect #'(unchecked-go 8 x))]))
```
The `syntax-protect` function causes any syntax object that is extracted
from the result of `go` to be _tainted_. The macro expander rejects
tainted identifiers, so attempting to extract `unchecked-go` from the
expansion of `(go 'a)` produces an identifier that cannot be used to
construct a new expression \(or, at least, not one that the macro
expander will accept\). The `syntax-rules`, `syntax-id-rule`, and
`define-syntax-rule` forms automatically protect their expansion
results.
More precisely, `syntax-protect` _arms_ a syntax object with a _dye
pack_. When a syntax object is armed, then `syntax-e` taints any syntax
object in its result. Similarly, `datum->syntax` taints its result when
its first argument is armed. Finally, if any part of a quoted syntax
object is armed, then the corresponding part is tainted in the resulting
syntax constant.
Of course, the macro expander itself must be able to _disarm_ a taint on
a syntax object, so that it can further expand an expression or its
sub-expressions. When a syntax object is armed with a dye pack, the dye
pack has an associated inspector that can be used to disarm the dye
pack. A `(syntax-protect stx)` function call is actually a shorthand for
`(syntax-arm stx #f #t)`, which arms `stx` using a suitable inspector.
The expander uses `syntax-disarm` and with its inspector on every
expression before trying to expand or compile it.
In much the same way that the macro expander copies properties from a
syntax transformers input to its output \(see \[missing\]\), the
expander copies dye packs from a transformers input to its output.
Building on the previous example,
`"n.rkt"`
```racket
#lang racket
(require "m.rkt")
(provide go-more)
(define y 'hello)
(define-syntax (go-more stx)
(syntax-protect #'(go y)))
```
the expansion of `(go-more)` introduces a reference to the unexported
`y` in `(go y)`, and the expansion result is armed so that `y` cannot be
extracted from the expansion. Even if `go` did not use `syntax-protect`
for its result \(perhaps because it does not need to protect
`unchecked-go` after all\), the dye pack on `(go y)` is propagated to
the final expansion `(unchecked-go 8 y)`. The macro expander uses
`syntax-rearm` to propagate dye packs from a transformers input to its
output.
#### 2.7.1. Tainting Modes
In some cases, a macro implementor intends to allow limited
destructuring of a macro result without tainting the result. For
example, given the following `define-like-y` macro,
`"q.rkt"`
```racket
#lang racket
(provide define-like-y)
(define y 'hello)
(define-syntax (define-like-y stx)
(syntax-case stx ()
[(_ id) (syntax-protect #'(define-values (id) y))]))
```
someone may use the macro in an internal definition:
```racket
(let ()
(define-like-y x)
x)
```
The implementor of the `"q.rkt"` module most likely intended to allow
such uses of `define-like-y`. To convert an internal definition into a
`letrec` binding, however, the `define` form produced by `define-like-y`
must be deconstructed, which would normally taint both the binding `x`
and the reference to `y`.
Instead, the internal use of `define-like-y` is allowed, because
`syntax-protect` treats specially a syntax list that begins with
`define-values`. In that case, instead of arming the overall expression,
each individual element of the syntax list is armed, pushing dye packs
further into the second element of the list so that they are attached to
the defined identifiers. Thus, `define-values`, `x`, and `y` in the
expansion result `(define-values (x) y)` are individually armed, and the
definition can be deconstructed for conversion to `letrec`.
Just like `syntax-protect`, the expander rearms a transformer result
that starts with `define-values`, by pushing dye packs into the list
elements. As a result, `define-like-y` could have been implemented to
produce `(define id y)`, which uses `define` instead of `define-values`.
In that case, the entire `define` form is at first armed with a dye
pack, but as the `define` form is expanded to `define-values`, the dye
pack is moved to the parts.
The macro expander treats syntax-list results starting with
`define-syntaxes` in the same way that it treats results starting with
`define-values`. Syntax-list results starting with `begin` are treated
similarly, except that the second element of the syntax list is treated
like all the other elements \(i.e., the immediate element is armed,
instead of its content\). Furthermore, the macro expander applies this
special handling recursively, in case a macro produces a `begin` form
that contains nested `define-values` forms.
The default application of dye packs can be overridden by attaching a
`'taint-mode` property \(see \[missing\]\) to the resulting syntax
object of a macro transformer. If the property value is `'opaque`, then
the syntax object is armed and not its parts. If the property value is
`'transparent`, then the syntax objects parts are armed. If the
property value is `'transparent-binding`, then the syntax objects parts
and the sub-parts of the second part \(as for `define-values` and
`define-syntaxes`\) are armed. The `'transparent` and
`'transparent-binding` modes trigger recursive property checking at the
parts, so that armings can be pushed arbitrarily deeply into a
transformers result.
#### 2.7.2. Taints and Code Inspectors
Tools that are intended to be privileged \(such as a debugging
transformer\) must disarm dye packs in expanded programs. Privilege is
granted through _code inspectors_. Each dye pack records an inspector,
and a syntax object can be disarmed using a sufficiently powerful
inspector.
When a module is declared, the declaration captures the current value of
the `current-code-inspector` parameter. The captured inspector is used
when `syntax-protect` is applied by a macro transformer that is defined
within the module. A tool can disarm the resulting syntax object by
supplying `syntax-disarm` with an inspector that is the same or a
super-inspector of the modules inspector. Untrusted code is ultimately
run after setting `current-code-inspector` to a less powerful inspector
\(after trusted code, such as debugging tools, have been loaded\).
With this arrangement, macro-generating macros require some care, since
the generating macro may embed syntax objects in the generated macro
that need to have the generating modules protection level, rather than
the protection level of the module that contains the generated macro. To
avoid this problem, use the modules declaration-time inspector, which
is accessible as `(variable-reference->module-declaration-inspector
(#%variable-reference))`, and use it to define a variant of
`syntax-protect`.
For example, suppose that the `go` macro is implemented through a macro:
```racket
#lang racket
(provide def-go)
(define (unchecked-go n x)
(+ n 17))
(define-syntax (def-go stx)
(syntax-case stx ()
[(_ go)
(protect-syntax
#'(define-syntax (go stx)
(syntax-case stx ()
[(_ x)
(protect-syntax #'(unchecked-go 8 x))])))]))
```
When `def-go` is used inside another module to define `go`, and when the
`go`-defining module is at a different protection level than the
`def-go`-defining module, the generated macros use of `protect-syntax`
is not right. The use of `unchecked-go` should be protected at the
level of the `def-go`-defining module, not the `go`-defining module.
The solution is to define and use `go-syntax-protect`, instead:
```racket
#lang racket
(provide def-go)
(define (unchecked-go n x)
(+ n 17))
(define-for-syntax go-syntax-protect
(let ([insp (variable-reference->module-declaration-inspector
(#%variable-reference))])
(lambda (stx) (syntax-arm stx insp))))
(define-syntax (def-go stx)
(syntax-case stx ()
[(_ go)
(protect-syntax
#'(define-syntax (go stx)
(syntax-case stx ()
[(_ x)
(go-syntax-protect #'(unchecked-go 8 x))])))]))
```
#### 2.7.3. Protected Exports
Sometimes, a module needs to export bindings to some modules—other
modules that are at the same trust level as the exporting module—but
prevent access from untrusted modules. Such exports should use the
`protect-out` form in `provide`. For example, `ffi/unsafe` exports all
of its unsafe bindings as _protected_ in this sense.
Code inspectors, again, provide the mechanism for determining which
modules are trusted and which are untrusted. When a module is declared,
the value of `current-code-inspector` is associated to the module
declaration. When a module is instantiated \(i.e., when the body of the
declaration is actually executed\), a sub-inspector is created to guard
the modules exports. Access to the modules protected exports requires
a code inspector higher in the inspector hierarchy than the modules
instantiation inspector; note that a modules declaration inspector is
always higher than its instantiation inspector, so modules are declared
with the same code inspector can access each others exports.
Syntax-object constants within a module, such as literal identifiers in
a template, retain the inspector of their source module. In this way, a
macro from a trusted module can be used within an untrusted module, and
protected identifiers in the macro expansion still work, even through
they ultimately appear in an untrusted module. Naturally, such
identifiers should be armed, so that they cannot be extracted from the
macro expansion and abused by untrusted code.
Compiled code from a `".zo"` file is inherently untrustworthy,
unfortunately, since it can be synthesized by means other than
`compile`. When compiled code is written to a `".zo"` file,
syntax-object constants within the compiled code lose their inspectors.
All syntax-object constants within compiled code acquire the enclosing
modules declaration-time inspector when the code is loaded.
## 3. Module Instantiations and Visits
Modules often contain just function and structure-type definitions, in
which case the module itself behaves in a purely functional way, and the
time when the functions are created is not observable. If a modules
top-level expressions include side effects, however, then the timing of
the effects can matter. The distinction between module declaration and
instantiation provides some control over that timing. The concept of
module visits further explains the interaction of effects with macro
implementations.
### 3.1. Declaration versus Instantiation
Declaring a module does not immediately evaluate expressions in the
modules body. For example, evaluating
```racket
> (module number-n racket/base
(provide n)
(define n (random 10))
(printf "picked ~a\n" n))
```
declares the module `number-n`, but it doesnt immediately pick a random
number for `n` or display the number. A `require` of `number-n` causes
the module to be _instantiated_ \(i.e., it triggers an
_instantiation_\), which implies that the expressions in the body of the
module are evaluated:
```racket
> (require 'number-n)
picked 5
> n
5
```
After a module is instantiated in a particular namespace, further
`require`s of the module use the same instance, as opposed to
instantiating the module again:
```racket
> (require 'number-n)
> n
5
> (module use-n racket/base
(require 'number-n)
(printf "still ~a\n" n))
> (require 'use-n)
still 5
```
The `dynamic-require` function, like `require`, triggers instantion of a
module if it is not already instantiated, so `dynamic-require` with `#f`
as a second argument is useful to just trigger the instantion effects of
a module:
```racket
> (module use-n-again racket/base
(require 'number-n)
(printf "also still ~a\n" n))
> (dynamic-require ''use-n-again #f)
also still 5
```
Instantiation of modules by `require` is transitive. That is, if
`require` of a module instantiates it, then any module `require`d by
that one is also instantiated \(if its not instantiated already\):
```racket
> (module number-m racket/base
(provide m)
(define m (random 10))
(printf "picked ~a\n" m))
> (module use-m racket/base
(require 'number-m)
(printf "still ~a\n" m))
> (require 'use-m)
picked 0
still 0
```
### 3.2. Compile-Time Instantiation
In the same way that declaring a module does not by itself instantiate a
module, declaring a module that `require`s another module does not by
itself instantiate the `require`d module, as illustrated in the
preceding example. However, declaring a module _does_ expand and compile
the module. If a module imports another with `(require (for-syntax
....))`, then module that is imported `for-syntax` must be instantiated
during expansion:
```racket
> (module number-p racket/base
(provide p)
(define p (random 10))
(printf "picked ~a\n" p))
> (module use-p-at-compile-time racket/base
(require (for-syntax racket/base
'number-p))
(define-syntax (pm stx)
#`#,p)
(printf "was ~a at compile time\n" (pm)))
picked 1
```
Unlike run-time instantiation in a namespace, when a module is used
`for-syntax` for another module expansion in the same namespace, the
`for-syntax`ed module is instantiated separately for each expansion.
Continuing the previous example, if `number-p` is used a second time
`for-syntax`, then a second random number is selected for a new `p`:
```racket
> (module use-p-again-at-compile-time racket/base
(require (for-syntax racket/base
'number-p))
(define-syntax (pm stx)
#`#,p)
(printf "was ~a at second compile time\n" (pm)))
picked 3
```
Separate compile-time instantiations of `number-p` helps prevent
accidental propagation of effects from one modules compilation to
another modules compilation. Preventing those effects make compilation
reliably separate and more deterministic.
The expanded forms of `use-p-at-compile-time` and
`use-p-again-at-compile-time` record the number that was selected each
time, so those two different numbers are printed when the modules are
instantiated:
```racket
> (dynamic-require ''use-p-at-compile-time #f)
was 1 at compile time
> (dynamic-require ''use-p-again-at-compile-time #f)
was 3 at second compile time
```
A namespaces top level behaves like a separate module, where multiple
interactions in the top level conceptually extend a single expansion of
the module. So, when using `(require (for-syntax ....))` twice in the
top level, the second use does not trigger a new compile-time instance:
```racket
> (begin (require (for-syntax 'number-p)) 'done)
picked 4
'done
> (begin (require (for-syntax 'number-p)) 'done-again)
'done-again
```
However, a run-time instance of a module is kept separate from all
compile-time instances, including at the top level, so a
non-`for-syntax` use of `number-p` will pick another random number:
```racket
> (require 'number-p)
picked 5
```
### 3.3. Visiting Modules
When a module `provide`s a macro for use by other modules, the other
modules use the macro by directly `require`ing the macro provider—i.e.,
without `for-syntax`. Thats because the macro is being imported for use
in a run-time position \(even though the macros implementation lives at
compile time\), while `for-syntax` would import a binding for use in
compile-time position.
The module implementing a macro, meanwhile, might `require` another
module `for-syntax` to implement the macro. The `for-syntax` module
needs a compile-time instantiation during any module expansion that
might use the macro. That requirement sets up a kind of transitivity
through `require` that is similar to instantiation transitivity, but
“off by one” at the point where the `for-syntax` shift occurs in the
chain.
Heres an example to make that scenario concrete:
```racket
> (module number-q racket/base
(provide q)
(define q (random 10))
(printf "picked ~a\n" q))
> (module use-q-at-compile-time racket/base
(require (for-syntax racket/base
'number-q))
(provide qm)
(define-syntax (qm stx)
#`#,q)
(printf "was ~a at compile time\n" (qm)))
picked 7
> (module use-qm racket/base
(require 'use-q-at-compile-time)
(printf "was ~a at second compile time\n" (qm)))
picked 4
> (dynamic-require ''use-qm #f)
was 7 at compile time
was 4 at second compile time
```
In this example, when `use-q-at-compile-time` is expanded and compiled,
`number-q` is instantiated once. In this case, that instantion is needed
to expand the `(qm)` macro, but the module system would proactively
create a compile-time instantiation of `number-q` even if the `qm` macro
turned out not to be used.
Then, as `use-qm` is expanded and compiled, a second compile-time
instantiation of `number-q` is created. That compile-time instantion is
needed to expand the `(qm)` form within `use-qm`.
Instantiating `use-qm` correctly reports the number that was picked
during that second modules compilation. First, though, the `require` of
`use-q-at-compile-time` in `use-qm` triggers a transitive instantiation
of `use-q-at-compile-time`, which correctly reports the number that was
picked in its compilation.
Overall, the example illustrates a transitive effect of `require` that
we had already seen:
* When a module is instantiated, the run-time expressions in its
body are evaluated.
* When a module is instantiated, then any module that it `require`s
\(without `for-syntax`\) is also instantiated.
This rule does not explain the compile-time instantiations of
`number-q`, however. To explain that, we need a new word, _visit_, for
the concept that we saw in Compile-Time Instantiation:
* When a module is visited, the compile-time expressions \(such as
macro definition\) in its body are evaluated.
* As a module is expanded, it is visited.
* When a module is visited, then any module that it `require`s
\(without `for-syntax`\) is also visited.
* When a module is visited, then any module that it `require`s
`for-syntax` is instantiated at compile time.
Note that when visiting one module causes a compile-time instantion of
another module, the transitiveness of instantiated through regular
`require`s can trigger more compile-time instantiations. Instantiation
itself wont trigger further visits, however, because any instantiated
module has already been expanded and compiled.
The compile-time expressions of a module that are evaluated by visiting
include both the right-hand sides of `define-syntax` forms and the body
of `begin-for-syntax` forms. Thats why a randomly selected number is
printed immediately in the following example:
```racket
> (module compile-time-number racket/base
(require (for-syntax racket/base))
(begin-for-syntax
(printf "picked ~a\n" (random)))
(printf "running\n"))
picked 0.25549265186825576
```
Instantiating the module evaluates only the run-time expressions, which
prints “running” but not a new random number:
```racket
> (dynamic-require ''compile-time-number #f)
running
```
The description of instantiates and visit above is phrased in terms of
normal `require`s and `for-syntax` `require`s, but a more precise
specification is in terms of module phases. For example, if module `A`
has `(require (for-syntax B))` and module `B` has `(require
(for-template C))`, then module `C` is instantiated when module `A` is
instantiated, because the `for-syntax` and `for-template` shifts cancel.
We have not yet specified what happens with `for-meta 2` for when
`for-syntax`es combine; we leave that to the next section, Lazy Visits
via Available Modules.
If you think of the top-level as a kind of module that is continuously
expanded, the above rules imply that `require` of another module at the
top level both instantiates and visits the other module \(if it is not
already instantiated and visited\). Thats roughly true, but the visit
is made lazy in a way that is also explained in the next section, Lazy
Visits via Available Modules.
Meanwhile, `dynamic-require` only instantiates a module; it does not
visit the module. That simplification is why some of the preceding
examples use `dynamic-require` instead of `require`. The extra visits of
a top-level `require` would make the earlier examples less clear.
### 3.4. Lazy Visits via Available Modules
A top-level `require` of a module does not actually visit the module.
Instead, it makes the module _available_. An available module will be
visited when a future expression needs to be expanded in the same
context. The next expression may or may not involve some imported macro
that needs its compile-time helpers evaluated by visiting, but the
module system proactively visits the module, just in case.
In the following example, a random number is picked as a result of
visiting a modules own body while that module is being expanded. A
`require` of the module instantiates it, printing “running”, and also
makes the module available. Evaluating any other expression implies
expanding the expression, and that expansion triggers a visit of the
available module—which picks another random number:
```racket
> (module another-compile-time-number racket/base
(require (for-syntax racket/base))
(begin-for-syntax
(printf "picked ~a\n" (random)))
(printf "running\n"))
picked 0.3634379786893492
> (require 'another-compile-time-number)
running
> 'next
picked 0.5057086679589476
'next
> 'another
'another
```
> Beware that the expander flattens the content of a top-level `begin`
> into the top level as soon as the `begin` is discovered. So, `(begin
> (require 'another-compile-time-number) 'next)` would still have printed
> “picked” before “next“.
The final evaluation of `'another` also visits any available modules,
but no modules were made newly available by simply evaluating `'next`.
When a module `require`s another module using `for-meta n` for some `n`
greater than 1, the `require`d module is made available at phase `n`. A
module that is available at phase `n` is visited when some expression at
phase `n`_-_1__ is expanded.
To help illustrate, the following examples use
`(variable-reference->module-base-phase (#%variable-reference))`, which
returns a number for the phase at which the enclosing module is
instantiated:
```racket
> (module show-phase racket/base
(printf "running at ~a\n"
(variable-reference->module-base-phase (#%variable-reference))))
> (require 'show-phase)
running at 0
> (module use-at-phase-1 racket/base
(require (for-syntax 'show-phase)))
running at 1
> (module unused-at-phase-2 racket/base
(require (for-meta 2 'show-phase)))
```
For the last module above, `show-phase` is made available at phase 2,
but no expressions within the module are ever expanded at phase 1, so
theres no phase-2 printout. The following module includes a phase-1
expression after the phase-2 `require`, so theres a printout:
```racket
> (module use-at-phase-2 racket/base
(require (for-meta 2 'show-phase)
(for-syntax racket/base))
(define-syntax x 'ok))
running at 2
```
If we `require` the module `use-at-phase-1` at the top level, then
`show-phase` is made available at phase 1. Evaluating another expression
causes `use-at-phase-1` to be visited, which in turn instantitates
`show-phase`:
```racket
> (require 'use-at-phase-1)
> 'next
running at 1
'next
```
A `require` of `use-at-phase-2` is similar, except that `show-phase` is
made available at phase 2, so it is not instantiated until some
expression is expanded at phase 1:
```racket
> (require 'use-at-phase-2)
> 'next
'next
> (require (for-syntax racket/base))
> (begin-for-syntax 'compile-time-next)
running at 2
```