@ -4,13 +4,13 @@ I welcome pull requests. But accepting a PR obligates me to maintain that code f
* There’s plenty of room for improvement in the Pollen code, because every line of it has been written against the backdrop of ignorance and fallibility, mostly my own. (= Principle of Prior Ignorance)
* PRs for simple documentation fixes (e.g., spelling and grammar corrections) are always welcome. For more substantial changes, I don’t necessarily prefer PRs to issues or feature requests. A good description of the problem with a working example is better than a half-baked PR. I can often fix it in less time than it would take to review the PR. (= Principle of Efficiency)
* I don’t necessarily prefer PRs to issues or feature requests. A good description of the problem with a working example is better than a half-baked PR. I can often fix it in less time than it would take to review the PR. (= Principle of Efficiency)
* If you want feedback on a potential PR, I recommend posting to the [Pollen forum](https://forums.matthewbutterick.com/c/typesetting/) rather than here. Because more people will see it. (= Principle of Exposure)
* If you want feedback on a potential PR, I recommend posting to the [Pollen mailing list](http://groups.google.com/forum/#!forum/pollenpub) rather than here. Because more people will see it. (= Principle of Exposure)
* Small PRs are easier to accept than large ones. Large PRs should have a benefit worthy of their complexity. PRs that want to amend Pollen’s public interface receive the highest scrutiny. (= Principle of Proportionality)
* I consider every PR, but I can’t promise detailed code reviews or comments. Helpful Racketeers can be found on the [Pollen forum](https://forums.matthewbutterick.com/c/pollen/), the [Racket mailing list](https://lists.racket-lang.org/), and the Racket [Slack channel](https://racket.slack.com/). (= Principle of Specialization)
* I consider every PR, but I can’t promise detailed code reviews or comments. Helpful Racketeers can be found on the [Pollen mailing list](http://groups.google.com/forum/#!forum/pollenpub), the [Racket mailing list](https://lists.racket-lang.org/), and the Racket [Slack channel](https://racket.slack.com/). (= Principle of Specialization)
* PRs should be necessary, in the sense that the proposed change can only be accomplished by patching this repo. (Corollary: features that can live in a separate [package](https://pkgs.racket-lang.org/) probably should.) (= Principle of Necessity)
## Pollen: the book is a program [](CODE_OF_CONDUCT.md)
## Pollen: the book is a program [](https://travis-ci.org/mbutterick/pollen)
A book-publishing system written in [Racket](http://racket-lang.org). This is the software I use to publish & maintain my web-based books [Beautiful Racket](http://beautifulracket.com), [Practical Typography](http://practicaltypography.com), and [Typography for Lawyers](http://typographyforlawyers.com).
@ -23,12 +23,8 @@ And update like so:
raco pkg update --update-deps pollen
Official forum: https://forums.matthewbutterick.com/c/typesetting/
Official discussion area: https://github.com/mbutterick/pollen-users
## License
MIT
## Project status
Actively developed, though the pace has slowed now that Pollen is arguably feature complete and stable. I use it almost every day so it's not going anywhere. But I have no plans to substantially enlarge or extend it.
@ -15,7 +15,7 @@ This is the core design principle of Pollen. Consistent with this principle, Pol
@item{@bold{A Pollen project consists of source files + static files.} A @italic{source file} is a file that can be compiled to produce certain output. A @italic{static file} is usable as it stands (e.g., an SVG file or webfont). Generally, the textual content of your book will live in source files, and other elements will be static files.}
@item{@bold{Source control is a good idea.} Because Pollen projects are software projects, they can be easily managed with systems for source control and collaboration. If you're a writer at heart, don't fear these systems —the learning curve is repaid by revision & edit tracking that's much easier than it is with Word or PDF files.}
@item{@bold{Source control is a good idea.} Because Pollen projects are software projects, they can be easily managed with systems for source control and collaboration, like @link["http://github.com"]{GitHub}. If you're a writer at heart, don't fear these systems —the learning curve is repaid by revision & edit tracking that's much easier than it is with Word or PDF files.}
The slowest part of a Pollen @racket[render] is compiling a source file. Because Pollen allows source files to be edited and previewed dynamically, these files get recompiled a lot. Therefore, Pollen stores copies of the exports of source files —namely, whatever is stored in @code[(format "~a" pollen-main-export)] and @code[(format "~a" pollen-meta-export)] —in a cache so they can be reused.
The slowest part of a Pollen @racket[render] is compiling a source file. Because Pollen allows source files to be edited and previewed dynamically, these files get recompiled a lot. Therefore, Pollen stores copies of the exports of source files —namely, whatever is stored in @code[(format "~a" default-main-export)] and @code[(format "~a" default-meta-export)] —in a cache so they can be reused.
In each directory of your project, Pollen writes cache files into a subdirectory called @filepath{compiled}. The files are stored on disk so they can be reused between sessions. If you delete files within a cache directory (or the whole thing), don't worry —everything will get regenerated. (However, I don't recommend trying to read or write directly to any @filepath{compiled} directory, as the implementation details of the cache are subject to change.)
@ -43,7 +43,7 @@ Be warned that this will make your rendering much slower. But you will be guaran
@section{Scope of dependency tracking}
The compile cache tracks the modification date of the source file, the current setting of @secref["The_POLLEN_environment_variable"], and the modification dates of the template and @filepath{pollen.rkt} (if they exist). For @tt{poly} source files, it also tracks the @racket[current-poly-target]. It also tracks files you've listed in the optional setup value @racket[setup:cache-watchlist] and environment variables listed in the optional setup value @racket[setup:envvar-watchlist].
The compile cache tracks the modification date of the source file, the current setting of @secref["The_POLLEN_environment_variable"], and the modification dates of the template and @filepath{pollen.rkt} (if they exist). For @tt{poly} source files, it also tracks the @racket[current-poly-target]. It also tracks any files you've listed in the optional setup value @racket[setup:cache-watchlist].
It does not, however, track every possible dependency. So in a complex project, it's possible to create deep dependencies that aren't noticed by the cache. In particular, Pollen does not track pagetree files as dependencies of other source files. Thus, if you change a pagetree, you'll ordinarily need to use @exec{raco pollen reset} to clear the caches.
@ -70,6 +70,8 @@ Attempt to retrieve the requested value out of the cache. If it's not there, or
These functions are the lower-level cousins of @racket[get-doc] and @racket[get-metas], which have a more convenient interface. Unless you have a special reason, you're better off using those.
Despite their names, these functions actually rely on @racket[setup:main-export] and @racket[setup:meta-export] (which default to @id[default-main-export] and @id[default-meta-export]). Thus, if you override those names, everything will still work as expected.
If you want the speed benefit of the cache, you should use @racket[cached-doc] and @racket[cached-metas] to get data from Pollen source files in preference to functions like @racket[require], @racket[local-require], and @racket[dynamic-require]. Those will also work. They'll just be slower.
@ -21,8 +21,6 @@ Pollen uses a special character — the @italic{lozenge}, which looks like this:
I chose the lozenge as the command character because a) it appears in almost every font, b) it's barely used in ordinary typesetting, c) it's not used in any programming language that I know of, and d) its shape and color allow it to stand out easily in code without being distracting.
Consideration (b) is especially important in a text-based language like Pollen. If Pollen used something more common as its command character, then every time you used that character in text, you'd have to specially escape it. This would make it cumbersome and annoying to import plain text into Pollen source files. This is the Pareto-optimal trade.
If you're using DrRacket, you can use the @onscreen{Insert Command Char} button at the top of the editing window to —you guessed it — insert the command character.
If you're using a different editor, here's how you type it:
@ -31,9 +29,9 @@ If you're using a different editor, here's how you type it:
@(linebreak)@bold{Windows}: holding down Alt, type 9674 on the num pad
@(linebreak)@bold{GNU/Linux, BSD}: Type Ctrl + Shift + U, then 25CA, then Enter
For more information on entering arbitrary Unicode characters, see @link["https://en.wikipedia.org/wiki/Unicode_input"]{Wikipedia}.
For more information on entering arbitrary Unicode glyphs, see @link["https://en.wikipedia.org/wiki/Unicode_input"]{Wikipedia}.
@subsection{``But I don't want to use the lozenge ...''}
@subsection{``But I don't want to use it ...''}
Fine, but you have to pick @italic{something} as your command character. If you don't like this one, you can override it within a project —see @seclink["setup-overrides"].
@ -614,7 +612,7 @@ Second, the metas are collected into a hash table that is exported with the name
The only key that's automatically defined in every meta table is @racket['#,pollen-here-path-key], which is the absolute path to the source file. (In this case, because the file hasn't been saved, you'll see the @val{unsaved-editor} name instead.)
The only key that's automatically defined in every meta table is @racket['#,(setup:here-path-key)], which is the absolute path to the source file. (In this case, because the file hasn't been saved, you'll see the @val{unsaved-editor} name instead.)
Still, you can override this too:
@ -748,14 +746,12 @@ And the metas:
@codeblock{
#lang racket/base
(require "path/to/your-pollen-source") ; doc and metas and everything else
(require (submod "path/to/your-pollen-source" metas)) ; just metas
(require "pollen-source.rkt") ; doc and metas and everything else
(require (submod "pollen-source.rkt" metas)) ; just metas
}
The @id{metas} submodule gives you access to the @id{metas} hashtable @italic{without} compiling the rest of the file. So if you need to harvest metas from a set of source files —for instance, page titles (for a table of contents) or categories — using @racket[require] with the submodule will be faster.
@bold{Pro tip #3}: Within a tag function, you can access the metas of the source currently being evaluated with @racket[current-metas].
@ -16,7 +16,8 @@ These functions are automatically imported into every Pollen source file (meanin
@section{Metas}
The only key that's automatically defined in every meta table is @racket['#,pollen-here-path-key], which holds the absolute path to the source file. For instance, you could retrieve this value with @racket[(select-from-metas '#,pollen-here-path-key metas)].
The only key that's automatically defined in every meta table is @racket['#,(setup:here-path-key)], which holds the absolute path to the source file. For instance, you could retrieve this value with @racket[(select-from-metas '#,(setup:here-path-key) metas)]. You can use something other than @racket['#,(setup:here-path-key)] as the key by overriding @racket[setup:here-path-key].
For a full introduction to metas, see @secref["Inserting_metas"].
@ -31,7 +32,7 @@ You can retrieve a meta value —even in the same document where you define it
@section{Splicing}
@defform[(\@ arg ...)]
The splicing tag signals that a list should be merged into its containing expression. The splicing tag is @racket['\@].
Splicing tag: signals that a list should be merged into its containing expression. You can use something other than @racket[\@] by overriding @racket[setup:splicing-tag].
@examples[#:eval my-eval
(module splicer pollen/markup
@ -40,24 +41,6 @@ The splicing tag signals that a list should be merged into its containing expres
doc
]
The splicing tag is useful when you want to return a list of X-expressions in a situation where you can only return one. For instance, @secref["Tag_functions"] can only return one X-expression. But if we wrap the list of X-expressions in a splicing tag, they behave like a single X-expression. Later, Pollen will merge the list elements into the surrounding expression (as shown above).
@examples[#:eval my-eval
(require pollen/tag)
(code:comment @#,t{wrong: function returns a list of X-expressions})
(define-tag-function (multi attrs elems)
'("foo" "bar"))
(code:comment @#,t{right: function returns a list of X-expressions})
(code:comment @#,t{as elements inside a splicing tag})
(define-tag-function (multi2 attrs elems)
'(\@ "foo" "bar"))
]
Though the splicing tag is cosmetically identical to the abbreviated notation of @litchar{@"@"} for @racket[unquote-splicing], and has a similar purpose, it's not the same thing. The splicing tag isn't a variable —it's just a symbol that Pollen treats specially when generating output.
@defform[(when/splice condition pollen-args)]
If @racket[_condition] is true, put the @racket[_pollen-args] into the document. Within a template file, usually invoked like so:
@ -44,7 +44,18 @@ This function doesn't do much on its own. Rather, it provides the hooks upon whi
Recall that in Pollen, all @secref["tags-are-functions"]. By default, the @racket[_tagged-xexpr] from a source file is tagged with @racket[root]. So the typical way to use @racket[decode] is to attach your decoding functions to it, and then define @racket[root] to invoke your @racket[decode] function. Then it will be automatically applied to every @racket[doc] during compile.
@margin-note{@link["https://docs.racket-lang.org/pollen-tfl/_pollen_rkt_.html#%28def._%28%28lib._pollen-tfl%2Fpollen..rkt%29._root%29%29"]{Here's an example} of invoking @racket[decode] via the @racket[root] tag. That example is part of the @racket[pollen-tfl] sample project, which you can install & study separately.}
For instance, here's how @racket[decode] is attached to @racket[root] in @link["http://practicaltypography.com"]{@italic{Butterick's Practical Typography}}. There's not much to it —
@margin-note{The @racket[hyphenate] function is not part of Pollen, but rather the @link["http://github.com/mbutterick/hyphenate"]{@racket[hyphenate] package}, which you can install separately.}
This illustrates another important point: even though @racket[decode] presents an imposing list of arguments, you're unlikely to use all of them at once. These represent possibilities, not requirements. For instance, let's see what happens when @racket[decode] is invoked without any of its optional arguments.
@ -291,9 +302,9 @@ The @racket[_linebreaker] argument can either be @racket[#f] (which will delete
Find paragraphs within @racket[_elements] and wrap them with @racket[_paragraph-wrapper]. Also handle linebreaks using @racket[decode-linebreaks].
What counts as a paragraph? Any @racket[_elements] that are either a) explicitly set apart with a paragraph separator, or b) adjacent to a @racket[block-txexpr?] (in which case the paragraph-ness is implied).
@ -15,17 +15,17 @@ Pollen handles six kinds of source files:
@itemlist[
@item{@bold{Preprocessor}, with file extension @ext[pollen-preproc-source-ext]}
@item{@bold{Preprocessor}, with file extension @ext[default-preproc-source-ext]}
@item{@bold{Markup}, with file extension @ext[pollen-markup-source-ext]}
@item{@bold{Markup}, with file extension @ext[default-markup-source-ext]}
@item{@bold{Markdown}, with file extension @ext[pollen-markdown-source-ext]}
@item{@bold{Markdown}, with file extension @ext[default-markdown-source-ext]}
@item{@bold{Null}, with file extension @ext[pollen-null-source-ext]}
@item{@bold{Null}, with file extension @ext[default-null-source-ext]}
@item{@bold{Scribble}, with file extension @ext[pollen-scribble-source-ext]}
@item{@bold{Scribble}, with file extension @ext[default-scribble-source-ext]}
@item{@bold{Pagetree}, with file extension @ext[pollen-pagetree-source-ext]. This is the only source type that does not produce an output file.}
@item{@bold{Pagetree}, with file extension @ext[default-pagetree-source-ext]. This is the only source type that does not produce an output file.}
]
@ -170,7 +170,7 @@ In all cases, if there is no corresponding source, return @racket[#f].
path?]
Convert a source path @racket[_p] into its corresponding output path. This function simply generates a path for a file — it does not ask whether the file exists.
If @racket[_p] has a @seclink["The_poly_output_type"]{@id[pollen-poly-source-ext] output type}, then @racket[->output-path] uses @racket[current-poly-target] as the output-path extension.
If @racket[_p] has a @seclink["The_poly_output_type"]{@id[default-poly-source-ext] output type}, then @racket[->output-path] uses @racket[current-poly-target] as the output-path extension.
Otherwise, there are no type-specific variants for this function because the output path of a Pollen source file is @seclink["Saving___naming_your_source_file"]{determined by its name}.
@ -27,7 +27,7 @@ For ease of use, the behavior of the Pollen language departs from the standard R
Commands must start with the special lozenge character @litchar{◊}. Other material is interpreted as plain text. See @secref["pollen-command-syntax"] for more.
You can change the command character for a project by overriding @racket[pollen-command-char].
You can change the command character for a project by overriding @racket[default-command-char].
@bold{How is this different from Racket?} In Racket, everything is a command, and plain text must be quoted.
@ -46,12 +46,14 @@ By default, every Pollen source file exports two identifiers:
Contains the output of the file. The type of output depends on the source format (about which, more below).}
@defthing[metas hasheq?]{
A table of key–value pairs with extra information that is extracted from the source. These @racket[metas] will always contain the key @racket['#,pollen-here-path-key], which returns a string representation of the full path to the source file. Beyond that, the only @racket[metas] are the ones that are specified within the source file (see the source formats below for more detail on how to specify metas).}
A table of key–value pairs with extra information that is extracted from the source. These @racket[metas] will always contain the key @racket['#,(setup:here-path-key)], which returns a string representation of the full path to the source file. Beyond that, the only @racket[metas] are the ones that are specified within the source file (see the source formats below for more detail on how to specify metas).}
As usual, you can use @racket[require], @racket[local-require], or @racket[dynamic-require] to retrieve these values. But within a Pollen project, the faster way is to use @racket[get-doc] and @racket[get-metas].
Pollen source files also make the @racket[metas] hashtable available through a submodule, unsurprisingly called @racket[metas]. So rather than importing a source file with @racket[(require "source.html.pm")], you can @racket[(require (submod "source.html.pm" metas))]. Accessing the metas this way avoids fully compiling the source file, and thus will usually be faster.
The names @racket[doc] and @racket[metas] can be changed for a project by overriding @racket[default-main-export] and @racket[default-meta-export].
@margin-note{The Pollen rendering system relies on these two exported identifiers, but otherwise doesn't care how they're generated. Thus, the code inside your Pollen source file could be written in @tt{#langracket} or @tt{#langwhatever}. As long as you @racket[provide] those two identifiers and follow Pollen's file-naming conventions, your source file will be renderable.}
@bold{How is this different from Racket?} In Racket, you must explicitly @racket[define] and then @racket[provide] any values you want to export.
@ -69,9 +71,9 @@ If a file called @filepath{pollen.rkt} exists in the same directory with a sourc
@bold{How is this different from Racket?} In Racket, you must explicitly import files using @racket[require].
Invoke the preprocessor dialect by using @code{#lang pollen/pre} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" pollen-preproc-source-ext)}. These forms are equivalent:
Invoke the preprocessor dialect by using @code{#lang pollen/pre} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" default-preproc-source-ext)}. These forms are equivalent:
@racketmod[#:file "sample.css.pp" pollen
@ -94,9 +96,9 @@ The output of the preprocessor dialect, provided by @racket[doc], is plain text.
Invoke the Markdown dialect by using @code{#lang pollen/markdown} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" pollen-markdown-source-ext)}. These forms are equivalent:
Invoke the Markdown dialect by using @code{#lang pollen/markdown} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" default-markdown-source-ext)}. These forms are equivalent:
@racketmod[#:file "sample.txt.pmd" pollen
@ -110,9 +112,9 @@ _...source...
The output of the Markdown dialect, provided by @racket[doc], is a tagged X-expression.
Invoke the Pollen markup dialect by using @code{#lang pollen/markup} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" pollen-markup-source-ext)}. These forms are equivalent:
Invoke the Pollen markup dialect by using @code{#lang pollen/markup} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" default-markup-source-ext)}. These forms are equivalent:
@racketmod[#:file "about.html.pm" pollen
@ -125,10 +127,10 @@ _...source...
The output of the Pollen markup dialect, provided by @racket[doc], is a tagged X-expression.
Invoke the pagetree dialect by using @code{#lang pollen/ptree} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" pollen-pagetree-source-ext)}. These forms are equivalent:
Invoke the pagetree dialect by using @code{#lang pollen/ptree} as the first line of your source file, or by using @code{#lang pollen} with a file extension of @code{@(format ".~a" default-pagetree-source-ext)}. These forms are equivalent:
@racketmod[#:file "main.ptree" pollen
@ -152,12 +154,12 @@ These aren't source formats because they don't contain a @tt{#lang pollen} line.
Files with the null extension are simply rendered as a copy of the file without the extension, so @filepath{index.html.p} becomes @filepath{index.html}.
@ -98,58 +98,5 @@ In general, I subscribe to the view that software should let you do what you wan
I've been using Pollen daily for several years (and will continue to do so, because my main work is writing). I've made Pollen available because a) I'm certain that others have had the same frustrations that I have, and b) feature suggestions and bug reports make it more useful for everyone.
I hope you enjoy using it.
@section{Getting more help}
@subsection{Bugs and feature requests}
Can be submitted as @link["https://git.matthewbutterick.com/mbutterick/pollen/issues"]{issues} at the main Pollen source repository.
@subsection{Questions & discussion}
For general tips and how-to questions, use the @link["https://forums.matthewbutterick.com/c/typesetting/"]{Pollen discussion forum}. I'll also use that list to post major changes and new features. You need an account to post (free and easy to set up with an email address).
(BTW, the former ``pollenpub'' Google Group and the ``pollen-users'' GitHub repo are now deprecated.)
@subsection{Can I see the source for @italic{Practical Typography} or @italic{Typography for Lawyers}?}
Yes, a tutorial project based on the previous version of @link["http://typographyforlawyers.com/"]{@italic{Typography for Lawyers}} is available by installing the @link["https://docs.racket-lang.org/pollen-tfl/"]{pollen-tfl} package the same way you installed Pollen.
The current versions of @italic{Practical Typography} & @italic{Typography for Lawyers} are generated from a single set of Pollen source files, which is a complication that makes them less suitable for an introductory tutorial. Still, even though this tutorial project is based on an earlier version, the coding techniques are very close to what I still use. Learn with confidence.
@subsection{Utilities & libraries}
@link["https://github.com/malcolmstill/pollen-count"]{pollen-count}: enumeration and cross-referencing library by Malcolm Still
@link["https://github.com/lijunsong/pollen-mode"]{pollen-mode}: Emacs mode for Pollen by Junsong Li
@link["https://github.com/basus/pollen-mode"]{Pollen mode}: Emacs mode for Pollen by Shrutarshi Basu
@link["https://docs.racket-lang.org/pollen-component/"]{Pollen Component}: Component-based development for Pollen by Leandro Facchinetti
@link["https://docs.racket-lang.org/css-expr/"]{CSS-expressions}: S-expression-based CSS by Leandro Facchinetti
@link["https://github.com/lijunsong/pollen-rock"]{Pollen Rock}: rendering server and an in-browser editor for Pollen
@link["https://github.com/appliedsciencestudio/talks/tree/master/mxnet"]{Polllen as a front end for Reveal.js} by Dave Liepmann. Reveal.js is a library that allows you to create slide presentations in pure HTML/CSS that run in the browser.
@subsection{More projects & guides}
@link["https://digitalwords.net"]{Digital Words} by Júda Ronén [@link["https://gitlab.com/rwmpelstilzchen/digitalwords.net"]{source}]
@link["https://thelocalyarn.com/excursus/secretary"]{Secretary of Foreign Relations} by Joel Dueck [@link["https://github.com/otherjoel/try-pollen"]{source}]
@link["https://github.com/fasiha/pollen-guide"]{A Poor Guide to Pollen} by Ahmed Fasih
@link["https://youtu.be/20GGVNBykaw"]{The World's Most Dangerous Racket Programmer} and @link["https://youtu.be/IMz09jYOgoc"]{Like a Blind Squirrel in a Ferrari}: short talks about Pollen that I gave at RacketCons 2013 and 2014, respectively.
@link["http://mstill.io"]{mstill.io blog} by Malcolm Still [@link["https://github.com/malcolmstill/mstill.io"]{source}]
I hope you enjoy using it. If you get stuck on something not covered here, see @secref["Getting_more_help" #:doc '(lib "pollen/scribblings/pollen.scrbl")].
Can be submitted as @link["https://github.com/mbutterick/pollen/issues"]{GitHub issues} at the main Pollen source repository.
@section{Questions & discussion}
For general tips and how-to questions, use the @link["https://github.com/mbutterick/pollen-users/issues"]{pollen-users discussion group} (on GitHub). I'll also use that list to post major changes and new features.
You need a GitHub account to post. If you don't have one, don't panic —they're free and easy to set up with an email address. @link["https://github.com/mbutterick/pollen-users"]{Instructions here}.
(BTW, the former ``pollenpub'' Google Group is now deprecated.)
@section{Utilities & libraries}
@link["https://github.com/malcolmstill/pollen-count"]{pollen-count}: enumeration and cross-referencing library by Malcolm Still
@link["https://github.com/lijunsong/pollen-mode"]{pollen-mode}: Emacs mode for Pollen by Junsong Li
@link["https://github.com/basus/pollen-mode"]{Pollen mode}: Emacs mode for Pollen by Shrutarshi Basu
@link["https://docs.racket-lang.org/pollen-component/"]{Pollen Component}: Component-based development for Pollen by Leandro Facchinetti
@link["https://docs.racket-lang.org/css-expr/"]{CSS-expressions}: S-expression-based CSS by Leandro Facchinetti
@link["https://github.com/lijunsong/pollen-rock"]{Pollen Rock}: rendering server and an in-browser editor for Pollen
@link["https://github.com/appliedsciencestudio/talks/tree/master/mxnet"]{Polllen as a front end for Reveal.js} by Dave Liepmann. Reveal.js is a library that allows you to create slide presentations in pure HTML/CSS that run in the browser.
@section{Can I see the source for Practical Typography or Typography for Lawyers?}
Yes, the source for @link["http://typographyforlawyers.com/"]{Typography for Lawyers} is available. In terms of content, TFL was originally the basis of Practical Typography. But in terms of code, this new TFL website is essentially a clone of Practical Typography, but rewritten to be clearer and more instructive, with extensive source comments. [@link["https://github.com/mbutterick/pollen-tfl"]{source}]
@section{More projects & guides}
@link["https://digitalwords.net"]{Digital Words} by Júda Ronén [@link["https://gitlab.com/rwmpelstilzchen/digitalwords.net"]{source}]
@link["https://thelocalyarn.com/excursus/secretary"]{Secretary of Foreign Relations} by Joel Dueck [@link["https://github.com/otherjoel/try-pollen"]{source}]
@link["https://github.com/fasiha/pollen-guide"]{A Poor Guide to Pollen} by Ahmed Fasih
@link["https://youtu.be/20GGVNBykaw"]{The World's Most Dangerous Racket Programmer} and @link["https://youtu.be/IMz09jYOgoc"]{Like a Blind Squirrel in a Ferrari}: short talks about Pollen that I gave at RacketCons 2013 and 2014, respectively.
@link["http://mstill.io"]{mstill.io blog} by Malcolm Still [@link["https://github.com/malcolmstill/mstill.io"]{source}]
@ -24,7 +24,7 @@ Pagetrees surface throughout the Pollen system. They're primarily used for navig
@section{Making pagetrees with a source file}
A pagetree source file either starts with @code{#lang pollen} and uses the @racketfont{@(format ".~a" pollen-pagetree-source-ext)} extension, or starts with @code{#lang pollen/ptree} and then can have any file extension.
A pagetree source file either starts with @code{#lang pollen} and uses the @racketfont{@(format ".~a" default-pagetree-source-ext)} extension, or starts with @code{#lang pollen/ptree} and then can have any file extension.
Unlike other Pollen source files, since the pagetree source is not rendered into an output format, the rest of the filename is up to you.
@ -436,7 +436,7 @@ Return the pagenode immediately after @racket[_p]. For @racket[next*], return al
[pagetree-source (or/c pagetree? pathish?)])
pagetree?
]
Get a pagetree from a @ext[pollen-pagetree-source-ext] source file, namely @racket[_pagetree-source]. If @racket[_pagetree-source] is already a pagetree, just pass it through.
Get a pagetree from a @ext[default-pagetree-source-ext] source file, namely @racket[_pagetree-source]. If @racket[_pagetree-source] is already a pagetree, just pass it through.
@ -17,7 +17,6 @@ Start a new document. Change the top line to:
The first line of every Pollen source file will start with @code{#lang pollen}.
@margin-note{If you prefer to use the command line and an editor other than DrRacket, equivalent command-line instructions follow at the end of each section. If you're using DrRacket, you can ignore these.}
@section{Running a source file}
@ -60,11 +59,6 @@ document.write('Hello world');
printf("Hello world");
}
@bold{Command line}: save the file as @filepath{hello.txt.pp} and then run:
@terminal{
> racket hello.txt.pp
}
@section{Naming, saving, and rendering a source file}
@ -161,12 +155,6 @@ Paradise Theatre}
Notice what happened —the Pollen project server dynamically regenerated the output file (@filepath{hello.txt}) from the source file (@filepath{hello.txt.pp}) after you edited the source. If you like, try making some more changes to @filepath{hello.txt.pp}, and reloading the browser to see the updates in @filepath{hello.txt}. The project server will regenerate the file whenever it changes.
@bold{Command line}: to see the changes after each edit, run:
@terminal{
> raco pollen render hello.txt.pp
> cat hello.txt
}
@section{Intermission}
@ -224,8 +212,6 @@ In your web browser, reload @link["http://localhost:8080/margin.html"]{@filepath
Still, this is the tiniest tip of the iceberg. The Pollen preprocessor gives you access to everything in the Racket programming language —including string manipulation, math functions, and so on.
@bold{Command line}: type the lozenge using whatever keyboard method you prefer (see @secref["the-lozenge"] for suggestions).
@section{Markdown mode}
When used as a preprocessor, Pollen's rule is that what you write is what you get. But if you're targeting HTML, who wants to type out all those @code{<tedious>tags</tedious>}? You can make Pollen do the heavy lifting by using an @defterm{authoring mode}.
@ -291,13 +277,6 @@ Pollen is handling three tasks here: interpreting the commands in the source, co
But what if you wanted to use Pollen as a preprocessor that outputs a Markdown file? No problem —just change the source name from @filepath{downtown.html.pmd} to @filepath{downtown.md.pp}. Changing the extension from @filepath{.pmd} to @filepath{.pp} switches Pollen from Markdown mode back to preprocessor mode. And changing the base name from @filepath{downtown.html} to @filepath{downtown.md} updates the name of the output file (and thereby skips the HTML conversion).
@bold{Command line}: to render the new source file after each edit, run:
@terminal{
> raco pollen render downtown.html.pmd
}
And then view the resulting @filepath{downtown.html} file however you like.
@section{Pollen markup}
@ -358,14 +337,6 @@ Return to the @link["http://localhost:8080/index.ptree"]{project dashboard} and
Pollen markup takes a little more effort to set up. But it also allows you more flexibility. If you want to do semantic markup, or convert your source into @seclink["fourth-tutorial"]{multiple output formats}, or handle complex page layouts —it's the way to go. (For more, see @seclink["Writing_with_Pollen_markup"
#:doc '(lib "pollen/scribblings/pollen.scrbl")].)
@bold{Command line}: to render the new source file after each edit, run:
@terminal{
> raco pollen render uptown.html.pm
}
And then view the resulting @filepath{uptown.html} file however you like.
@section{Templates}
The HTML pages we just made looked pretty dull. For the last stop on the quick tour, let's fix that.
@ -392,14 +363,6 @@ This is a simple HTML file that should look familiar, except for the two templat
Return to your web browser and reload @link["http://localhost:8080/uptown.html"]{@filepath{uptown.html}}. (Or @link["http://localhost:8080/downtown.html"]{@filepath{downtown.html}} —both will work.) The page will be rendered with the new @filepath{template.html}. As before, you can edit the template or the source and the project server will dynamically update the output file.
@bold{Command line}: to refresh the output after each edit of @filepath{template.html}, run:
@ -102,9 +102,7 @@ Paths can also be specified as output rather than input paths, and the correspon
> raco pollen render foo.html
> raco pollen render foo.html bar.html zam.css}
If a pagetree file is included in @racket[_source], all the files it lists will be rendered using the above rules.
The optional @exec{--target} or @exec{-t} switch specifies the render target to use for multi-output source files. (Files of other types encountered in @racket[_source] will still be rendered as usual.) If the target is omitted, the renderer will use whatever target appears first in @racket[(setup:poly-targets)].
The optional @exec{--target} or @exec{-t} switch specifies the render target for multi-output source files. If the target is omitted, the renderer will use whatever target appears first in @racket[(setup:poly-targets)].
@terminal{
> raco pollen render -t pdf foo.poly.pm}
@ -132,7 +130,9 @@ As a rule of thumb, parallel rendering works best if you do @exec{raco setup} fi
@italic{Warning}: In all cases, the newly rendered output file will overwrite any previous output file.
@bold{Directory mode}: @racket[raco pollen render _directory] renders all preprocessor source files and then all pagetree files found in the specified directory. If none of these files are found, a pagetree will be generated for the directory (which will include all source files, but also everything else that exists there; see @secref["The_automatic_pagetree"]) and then rendered. If the @racket[_directory] argument is omitted, the command defaults to the current directory.
@margin-note{As of mid-2020, Pollen's parallel-processing performance under the CS (= Chez Scheme) variant of Racket is worse than ordinary Racket. If you use Racket CS, you may get better results using @exec{-j 4} (which will limit the operation to four cores) than @exec{-p} (which will use all available cores).}
@bold{Directory mode}: @racket[raco pollen render _directory] renders all preprocessor source files and then all pagetree files found in the specified directory. If none of these files are found, a pagetree will be generated for the directory (which will include all source files) and then rendered. If the @racket[_directory] argument is omitted, the command defaults to the current directory.
In directory mode, this command can be invoked with two other optional arguments (in addition to the @exec{--target}, @exec{--parallel}, and @exec{--jobs} switches mentioned above):
@ -75,7 +75,7 @@ Note that @racket[_pt-or-pt-source] is used strictly as a list of files to rende
Find a template file for @racket[_source-path], with the following priority:
@itemlist[#:style 'ordered
@item{If the @racket[metas] for @racket[_source-path] have a key for @code[(format "~a" pollen-template-meta-key)], then use the value of this key, e.g. —
@item{If the @racket[metas] for @racket[_source-path] have a key for @code[(format "~a" default-template-meta-key)], then use the value of this key, e.g. —
@code{◊(define-meta template "my-template.html")}
@ -88,7 +88,7 @@ If your project has @seclink["fourth-tutorial"]{multiple output targets}, you ca
}
@item{If this key doesn't exist, or refers to a nonexistent file, look for a default template with the name @code[(format "~a.[output extension]" pollen-template-prefix)]. Meaning, if @racket[_source-path] is @code[(format "intro.html.~a" pollen-markup-source-ext)], the output path would be @code["intro.html"], so the default template would be @code[(format "~a.html" pollen-template-prefix)]. Look for this default template in the same directory as the source file, and then search upwards within successive parent directories. (Corollary: a default template in the project root will apply to all files in the project unless overridden within a subdirectory.)}
@item{If this key doesn't exist, or refers to a nonexistent file, look for a default template with the name @code[(format "~a.[output extension]" default-template-prefix)]. Meaning, if @racket[_source-path] is @code[(format "intro.html.~a" default-markup-source-ext)], the output path would be @code["intro.html"], so the default template would be @code[(format "~a.html" default-template-prefix)]. Look for this default template in the same directory as the source file, and then search upwards within successive parent directories. (Corollary: a default template in the project root will apply to all files in the project unless overridden within a subdirectory.)}
@item{If this file doesn't exist, use the fallback template as a last resort. (See @secref["Templates"
@ -71,6 +55,23 @@ Every @racket[setup:]@racket[_name] function will resolve the current value of t
Determines the default HTTP port for the project server.}
@defoverridable[main-export symbol?]{The main X-expression exported from a compiled Pollen source file.}
@defoverridable[meta-export symbol?]{The meta hashtable exported from a compiled Pollen source file.}
@defoverridable[extension-escape-char char?]{Character for escaping output-file extensions within source-file names.}
@deftogether[(
@defoverridable[preproc-source-ext symbol?]
@defoverridable[markup-source-ext symbol?]
@defoverridable[markdown-source-ext symbol?]
@defoverridable[null-source-ext symbol?]
@defoverridable[pagetree-source-ext symbol?]
@defoverridable[template-source-ext symbol?]
@defoverridable[scribble-source-ext symbol?]
)]{File extensions for Pollen source files.}
@defoverridable[main-pagetree string?]{Pagetree that Pollen dashboard loads by default in each directory.}
@ -88,6 +89,8 @@ Determines the default HTTP port for the project server.}
@defoverridable[command-char char?]{The magic character that indicates a Pollen command, function, or variable.}
@defoverridable[template-prefix string?]{Prefix of the default template.}
@deftogether[(
@(defoverridable newline string?)
@ -144,6 +147,12 @@ Both the names and the values of environment variables are case-insensitive, so
@history[#:added "1.1"]}
@defoverridable[splicing-tag symbol?]{Key used to signal that an X-expression should be spliced into its containing X-expression.}
@defoverridable[poly-source-ext symbol?]{Extension that indicates a source file can target multiple output types.}
@defoverridable[poly-targets (listof symbol?)]{List of symbols that denotes the possible targets of a @racket['poly] source file.}
@ -153,16 +162,13 @@ Both the names and the values of environment variables are case-insensitive, so
@history[#:added "1.5"]}
@defoverridable[allow-unbound-ids? boolean?]{Predicate that controls whether Pollen converts unbound identifiers into default tags by altering the behavior of @racket[#%top] in @racketmodname[pollen/top].
@defoverridable[allow-unbound-ids? boolean?]{Predicate that controls whether Pollen converts unbound identifiers into default tags by altering the behavior of @racket[#%top] in @racketmodname[pollen/top].
@history[#:added "2.0"]}
@history[#:added "2.0"]}
@defoverridable[external-renderer (or/c (list/c module-path? symbol?) #f)]{A module path and identifier (suitable for use with @racket[dynamic-require]) that provide a function for Pollen to call instead of @racket[render] when rendering files needed by the @seclink["Using_the_project_server"]{project server} or when running @secref["raco_pollen_render"]. The function must accept the same arguments as @racket[render-to-file] and should return the final output as a @tech[#:doc '(lib "scribblings/reference/reference.scrbl")]{string} or @tech[#:doc '(lib "scribblings/reference/reference.scrbl")]{byte string}. Pollen will always write this return value out to the output file for you.
@defoverridable[here-path-key 'symbol]{Key used to store the path of the source file in its metas table. No idea why you'd want to change this.}
Setting this value gives you full control over (and responsibility for) how Pollen converts the compiled @racketidfont{doc} and @racketidfont{metas} from source files into their final output. Your renderer should be able to handle any of Pollen’s @seclink["Source_formats"]{source formats} or @seclink["Utility_formats"]{utility formats}. The operation of Pollen’s @racket[render] function is not affected by setting this value, so your renderer can use it as a fallback.
@history[#:added "3.2"]}
@section{Parameters}
I mean @italic{parameters} in the Racket sense, i.e. values that can be fed to @racket[parameterize].
@ -16,7 +16,7 @@ That's no longer true. The web is now more than 20 years old. During that time,
But one part hasn't improved much: the way we make web pages. Over the years, tools promising to simplify web development have come and mostly gone —from @link["http://www.macobserver.com/reviews/pagemill2.shtml"]{PageMill} to @link["http://www.adobe.com/products/dreamweaver.html"]{Dreamweaver} to @link["http://www.squarespace.com"]{Squarespace}. Meanwhile, serious web jocks have remained loyal to the original HTML power tool: the humble text editor.
In one way, this makes sense. Web pages are made mostly of text-based data —HTML, CSS, JavaScript, and so on — and the simplest way to manipulate this data is with a text editor. While HTML and CSS are not programming languages — you can't even compute 1 + 1 — they lend themselves to semantic and logical structure that's most easily expressed by editing them as text. Furthermore, text-based editing makes debugging and performance improvements easier.
In one way, this makes sense. Web pages are made mostly of text-based data —HTML, CSS, JavaScript, and so on — and the simplest way to mainpulate this data is with a text editor. While HTML and CSS are not programming languages — you can't even compute 1 + 1 — they lend themselves to semantic and logical structure that's most easily expressed by editing them as text. Furthermore, text-based editing makes debugging and performance improvements easier.
But text-based editing is also limited. Though the underlying description of a web page is notionally human-readable, it's optimized to be readable by other software — namely, web browsers. HTML in particular is verbose and easily mistyped. And isn't it fatally dull to manage all the boilerplate, like surrounding every paragraph with @code{<p>...</p>}? Yes,itis.
@ -32,7 +32,7 @@ As I mentioned in the @secref["big-picture"], Pollen is built using Racket, and
But if not, or if you're just a curious character:
One of the key features of Racket as a programming language is that it provides tools to create @italic{other} programming languages. These languages might look & behave @link["http://docs.racket-lang.org/ts-guide/index.html"]{like Racket}. Or they @link["http://hashcollision.org/brainfudge/index.html"]{might not}. These languages might serve a general purpose, but more often they're specialized for a particular purpose, in which case they're known as @italic{domain-specific languages}, or @italic{DSLs}.
One of the key features of Racket as a programming language is that it provides tools to create @italic{other} programming languages. These languages might look & behave @link["http://docs.racket-lang.org/ts-guide/index.html"]{like Racket}. Or they @link["http://hashcollision.org/brainfudge/"]{might not}. These languages might serve a general purpose, but more often they're specialized for a particular purpose, in which case they're known as @italic{domain-specific languages}, or @italic{DSLs}.
If you find this a strange idea, you're not alone. Most programmers — and until recently, me too —have never made or used DSLs. If you have a programming problem to solve, you start with a general-purpose language like Python or Java or Ruby, and go from there. Nothing wrong with that.
@ -199,11 +199,11 @@ The goal of this whole endeavor was to derive multiple output files from one sou
@seclink["Templates" #:tag-prefixes '("tutorial-2")] should be familiar to you by now. As usual, the name of the template is @tt{template} plus the relevant file extension, so in this case @filepath{template.txt.p}. Add the file as follows:
What we're doing here is converting the X-expression to text in a smarter way. We use @racket[require] to bring in @racketmodname[racket/list] so we can use the @racket[flatten] function.
What we're doing here is converting the X-expression to text in a smarter way. Because we're in a template, we use @racket[local-require] (rather than plain @racket[require]) to bring in @racketmodname[racket/list] so we can use the @racket[flatten] function.
To understand what the next line does, just read it from the inside out: ``Take the @racket[doc] export from the source file (which is an X-expression), @racket[flatten] it into a list, @racket[filter] with @racket[string?] (creating a list that's only strings) and @racket[apply] the @racket[string-append] function to these, resulting in one big string.'' Which is exactly what we need for a plain-text file.
@ -304,7 +304,7 @@ Then a @filepath{template.ltx.p}:
@ -391,7 +391,7 @@ First, we use @filepath{template.pdf.p} rather than @filepath{template.pdf} for
A quick narrative of the rest:
@codeblock|{
◊(require racket/file racket/system)
◊(local-require racket/file racket/system)
}|
We need @racketmodname[racket/file] for @racket[display-to-file] and @racket[file->bytes]; we need @racketmodname[racket/system] for @racket[system] (to use the command line).
@ -21,7 +21,7 @@ Pygments is a Python library (though you don't need to know any Python to use it
@subsection[#:tag "pygments-with-pollen"]{Using Pygments with Pollen}
I used @link["http://pygments.org/"]{Pygments} for syntax highlighting in @link["https://beautifulracket.com/"]{@italic{Beautiful Racket}}. Links to the source are available at the bottom of the article.
I used @link["http://pygments.org/"]{Pygments} for syntax highlighting in @link["http://unitscale.com/mb/technique/dual-typed-untyped-library.html"]{this article made with Pollen}. Links to the source are available at the bottom of the article.
@ -226,22 +226,15 @@ I am **so** happy to be writing this.
Before you preview this file in the project server, click the @onscreen{Run} button in DrRacket just to see what the file produces. You'll see something like this:
@repl-output{
'(root
(h1 ((id "deep-thought")) "Deep Thought")
(p "I am " (strong "so") " happy to be writing this."))
(p "I am " (strong "so") " happy to be writing this."))}
You should now be able to recognize this as an X-expression. In authoring mode, Pollen compiles your Markdown into the corresponding HTML entities, but then provides the data as an X-expression rather than finished HTML.
From what you learned in the last section, it should be evident that this X-expression will convert to HTML that looks like this:
@terminal{
<root>
<h1 id="deep-thought">Deep Thought</h1>
<p>I am <strong>so</strong> happy to be writing this.</p>
<p>I am <strong>so</strong> happy to be writing this.</p></root>}
``But what's this @code{root} tag? That's not HTML.'' An X-expression that holds other X-expressions must have a root tag. So in the spirit of obviousness, every X-expression produced by Pollen in authoring mode will start with @code{root}. If you don't need it, you can discard it (we'll cover this below, in @secref[#:tag-prefixes '("tutorial-2")]{Templates}). Though as you'll learn in the @seclink["third-tutorial"]{third tutorial}, @code{root} also creates a useful hook for further processing — it's not a superfluous accessory.
@ -298,7 +291,7 @@ And two major differences:
@margin-note{``So a template is also a Pollen source file?'' Not quite. More accurately, it's a fragment of Pollen source that is completed by adding the X-expression that comes out of one of your source files. Because of this, there are a few extra limitations on the code you can put in a template, though with easy workarounds.}
@margin-note{``So a template is also a Pollen source file?'' Not quite. More accurately, it's a fragment of Pollen source that is completed by adding the X-expression that comes out of one of your source files. Because of this, there are a few extra limitations on the code you can put in a template, though with easy workarounds (for instance, you can't use @racket[require] in a template, but you can use @racket[local-require], which accomplishes the same thing).}
To see how this works, let's return to the source file we started in the last section:
@ -371,6 +364,9 @@ Finally, we need to include the X-expression from our source file. By convention
@margin-note{You can change the name of @code{doc} by overriding @racket[default-main-export].}
To summarize: this template contains a skeletal HTML page (in X-expression format). We drop @code{doc} into the template to indicate where the X-expression of our source file should be inserted. Finally, we convert the whole X-expression to HTML with @racket[->html].
``So I have to convert my HTML template to an X-expression?'' No. That's optional. You can also put hard-coded HTML in your template. Here's an equivalent way of writing @filepath{fallback.html.p}, with explicit HTML:
@ -405,9 +401,6 @@ Beyond that, all we need to do make sure our template has the three key ingredie
In your project directory, create a new file called @filepath{template.html.p}:
@margin-note{If you're using DrRacket on Mac OS to save this file, it may insist on adding a @filepath{rkt} extension to the filename. If so, you can either correct the filename after you save the file, or instead use a different text editor to create @filepath{template.html.p}.}
@ -195,7 +195,7 @@ Then you have two options for adding attributes. The verbose way corresponds to
Each key–value pair is in parentheses, and then the list of pairs is within parentheses, with a @racket[quote] (@litchar{'}) at the front that signals that the text should be used literally.
But this is boring to type out, so Pollen also allows you to specify attributes in tag functions with Racket-style @seclink["keyword-args" #:doc '(lib "scribblings/guide/guide.scrbl")]{keyword arguments}:
But this is boring to type out, so Pollen also allows you to specify attributes with Racket-style @seclink["keyword-args" #:doc '(lib "scribblings/guide/guide.scrbl")]{keyword arguments}:
@fileblock["article.html.pm" @codeblock{
#lang pollen
@ -205,8 +205,6 @@ But this is boring to type out, so Pollen also allows you to specify attributes
In this form, each attribute name is prefixed with @litchar{#:}, indicating a keyword argument. As before, the attribute value is in quotation marks following the keyword name.
@margin-note{This keyword notation will work by default with any tag. When you're making a custom tag function, use @racket[define-tag-function] (rather than the usual @racket[define]) if you want your tag function to support keyword notation the same way.}
Both of these forms will produce the same X-expression:
@ -515,7 +513,7 @@ This will produce an error in DrRacket:
@errorblock{
pollen markup error: in '(root "Pi is close to " 3.141592653589793 "." "\n" "The hyperbolic sine of pi is close to " 11.548739357257748 "."), 3.141592653589793 is not a valid element (must be txexpr, string, symbol, XML char, or cdata)}
This code would not, however, produce an error if it were being run as a Pollen preprocessor file, because the preprocessor automatically converts numbers to strings. If you'd like to verify this, change the suffix to @code{.pp} and run the file again.
This code would not, however, produce an error if it were being run as a Pollen preprocessor file, because the prepreocessor automatically converts numbers to strings. If you'd like to verify this, change the suffix to @code{.pp} and run the file again.
@ -12,7 +12,7 @@ Inconsistent with this system, Pollen's version also appends a build number, whi
@section{Source code}
Pollen's source code is @link["https://git.matthewbutterick.com/mbutterick/pollen/"]{available from this Git repo}. The @tt{MASTER} branch of the repo will always contain the most recent stable version.
Pollen's source code is @link["http://github.com/mbutterick/pollen"]{available from this Git repo}. The @tt{MASTER} branch of the repo will always contain the most recent stable version.
Racket's @link["http://pkg.racket-lang.org"]{package catalog} relies on this branch, so if you get your updates with @tt{raco pkg update pollen}, you'll get the most recent updates from this branch.
@ -24,25 +24,6 @@ Beyond keeping the commit history available, I make no promise to maintain the p
@section{Changelog}
@subsection{Version 3.2}
Added @racket[setup:external-renderer].
@subsection{Version 3.1}
Downgraded the following @racket[pollen/setup] values from configurable to fixed: @racket[here-path-key], @racket[extension-escape-char].
@subsection{Version 3.0}
Changed rendering model to share a namespace between sequential renders, improving speed.
Added @racket[--force] switch to @secref["raco_pollen_render" #:doc '(lib "pollen/scribblings/pollen.scrbl")].
Added @racket[--dry-run] switch to @secref["raco_pollen_publish" #:doc '(lib "pollen/scribblings/pollen.scrbl")].
Downgraded the following @racket[pollen/setup] values from configurable to fixed: @racket[splicing-tag], @racket[preproc-source-ext], @racket[markup-source-ext], @racket[markdown-source-ext], @racket[null-source-ext], @racket[pagetree-source-ext], @racket[template-source-ext], @racket[scribble-source-ext], @racket[poly-source-ext], @racket[cache-dir-name], @racket[cache-subdir-name], @racket[template-prefix], @racket[fallback-template-prefix], @racket[template-meta-key], @racket[main-export], @racket[meta-export], @racket[meta-tag-name], @racket[define-meta-name].
@subsection{Version 2.2}
Added @racket[--null] and @racket[--dry-run] switches to @secref["raco_pollen_render" #:doc '(lib "pollen/scribblings/pollen.scrbl")].
Matthew Butterick